Sena SMH10 - Système Intercom Bluetooth Moto pour Casques Bell Mag-9/Qualifier DLX
281,99 $ - 511,65 $
253,78 $ - 460,48 $
10% off
Sena SMH10 - Système Intercom Bluetooth Moto pour Casques Bell Mag-9/Qualifier DLX NUMÉRO D'ARTICLE # 153718
Description
Caractéristiques :
- Amplificateur audio
- Réglage du volume individuel
- Molette polyvalente
- Utilisation lors de chargement
- Micrologiciel pouvant être mis à jour
Généralités
- Durée de conversation : 12 heures
- Durée en mode veille : 10 jours
- Distance d'utilisation (Intercom) : jusqu'à 900 mètres en plein air
- Intercom conférence quadridirectionnel
Dimensions
- Casque audio : 84,1 x 56,5 x 38,6 mm (3,3 x 2,2 x 1,5 po)
- Poids du casque audio : 60 g
- Unité de fixation : 84 g
Bluetooth
- Profil : Profil Casque, Profil Mains Libres (HFP)
- Profil de distribution audio avancé (A2DP)
- Profil de commande à distance audio / vidéo (AVRCP)
- Bluetooth v3.0+EDR
Audio
- Codec SBC intégré
- Instructions vocales
- Appel en conférence avec participant intercom
- Suppression de bruit
- Réduction du bruit causé par le vent
- Réglage du volume global
- Taux d'échantillonnage : 48 kHz (CNA)
- Connexion audio-in auxiliaire via prise 3,5 mm
Batterie
- Temps de charge : 2,5 heures
- Type : Batterie lithium polymère
Veuillez noter : Certaines des fonctionnalités ci-dessus nécessitent la mise à jour du micrologiciel à la dernière version. Le micrologiciel est gratuitement téléchargeable à partir de Sena Technologies.
Numéros de pièce for Sena SMH10 - Système Intercom Bluetooth Moto pour Casques Bell Mag-9/Qualifier DLX
Videos
Videos
Évaluations
Rated 4 de
5
de
Denis9332 par
Super ensemble de communication
Très facile à utiliser et de très bonne qualité. La qualité sonore pour les communications et pour le téléphone est excellente mais la qualité sonore pour la musique est minable. Ayant lu beaucoup de commentaires au sujet des haut-parleurs de casque de moto, celui-ci est considéré étant le meilleur sur le marché alors imaginez les autres concurrents.
Date de publication: 2016-06-28
Rated 5 de
5
de
Guybert par
Easy setup!
I was looking to replace my helmet, and had always disliked the fact that my headset interfered wth my jacket collar when turning my head. When I came across the Bell Mag-9 and Sena SMH10 combo, it was a no brainer. This helmet is made to fit this headset, so no more interference. Setup is extremely quick and easy on this headset, and connectivity between a pair is achieved in a few short seconds. I’m extremely happy with my choice!
Date de publication: 2020-04-17
Rated 5 de
5
de
10Power par
Fitment and sound quality are Excellent
I installed this specific set on my Bell qualifier helmets for my wife and I and have found them to be Excellent in the sound and ease of use. Very Clear and many accessories to help you in any situation for charging or better fitment. A+
My Sena is connected to my cell and hers is connected to her cell, and we listen to music from my cell or we talk. These things are excellent at multitasking!!!
Date de publication: 2019-06-13
Rated 4 de
5
de
Rick par
Effortless Install
If you have a Bell Mag 9 helmet, or the HD equivalent, this is the intercom to get! Fits like a glove. Were a little tricky to get working the first time but work well once you take your time and follow directions. Only reason I don't give them 5 stars is that this version, designed to fit the helmet, has not been upgraded with Sena's latest features, like Bluetooth 4. Then again, the price reflects this. Not sure about group use, as I have not had the chance to try it yet, but excellent for rider and pasenger
Date de publication: 2016-05-05
Rated 5 de
5
de
Rope par
It does everything it says it will do!
I bought this mid winter so have not tryed it out a lot. The speakers are loud enough but not much bass
Date de publication: 2016-02-07
Rated 3 de
5
de
Rich par
ok at low speeds
bought it hoping to use with GPS, phone maybe music.
Used with the Bell helmet could not be used at speeds above 75 kmh
So good for slow tourist runs or city speeds
Date de publication: 2015-10-17
Rated 5 de
5
de
Db123 par
Item as described
I purchased this for a motorcycle trip around Lake Superior, worked flawlessly. I would highly recommend this product to anyone looking for a great Bluetooth unit.
Date de publication: 2022-08-22
Rated 5 de
5
de
Dan Dan par
Simple & efficace
Installation rapide et configuration simple avec casque Bell Mag-9, qualité sonore intercom / musique bonne sauf lors de grand vent ou il y a beaucoup de bruit de fond.
Date de publication: 2022-05-28
Questions
I have a bell mag 9 helmet and a Goldwing F6B that does not have bluetooth. Can this be wired to the 5 pin?
No, you would have to purchase the "Sena Freewire Wireless Bluetooth Adapter" - item #535466 to connect to your on board audio on the Goldwing
Date de publication: 2019-09-24
I have the smh10 dual head set. I have would like to install in a bell Mag 9. I have read that there is a special clamp? I am having trouble finding it.
The Sena SMH10 Helmet Clamp Kit for Bell Mag-9 can be found listed under item# 194254
Date de publication: 2015-04-14
Does the dual kit come with mounting hardware for both the bell qualifier as well as other helmets? Im getting the bell, but my wife has a different 3/4 face helmet. Will i need to buy separate mounting plates?
Yes, you would need to purchase separate mounting plates. You can find them listed under item #203043 and #81876
Date de publication: 2019-08-05
Is this able to also mount to a non Mag-9 or Qualifier? Does it also include just the regular mount as well as the adapter for the Bell helmets?
Mine is mounted to a Qualifier DLX and I specified that it would be when I ordered it. Came with adapter for the Qualifier only if I recall properly. Just be clear when you order it.
Date de publication: 2018-05-21
Can the universal microphone be plugged into this headset? I would rather have the "button" style versus the boom style.
I have a Bell Qualifier DLX helmet with the built in spot for Bluetooth. Which mode do you recommend (just for listening to music)
So, with this kit, for a Bell DLX helmet, i have no other parts to buy? The adaptor for DLX is included in the kit?
Not sure,my helmet was the bell mag 9.it was made to take the smh 10 and worked perfectly.I did hear that bell and sena had a bit of a disagreement and bell stopped making the mag 9, so perhaps the dlx is a rehash.
Date de publication: 2018-06-12
So with this specific Sena SMH 10 set, does it come with the required clamp set that is necessary for the Bell Qualifer DLX helmet? Meaning I do not have to purchase the clamp (part number #194254)?
correct. you get everything you need for the DLX. Its painless
Date de publication: 2023-05-23