Produits similaires Voir d'autres produits d'intérêt
NUMÉRO D'ARTICLE #230952
JT - Pignon Avant en Acier
7,87 $ - 58,99 $
JT - Pignon Avant en Acier NUMÉRO D'ARTICLE # 230952
Description
Caractéristiques :
- Les pignons JT sont fabriqués à partir de la dernière génération d'équipements de conception et de contrôle par ordinateur de la découpe des métaux pour une durabilité maximale
- Les pignons avant sont fabriqués en alliage d'acier chromoly SCM420
- Tous les pignons sont traités thermiquement et finis à la main pour satisfaire ou dépasser les normes de qualité les plus élevées possibles
Numéros de pièce for JT - Pignon Avant en Acier
Fitment for Parts JT - Pignon Avant en Acier
This part fits the following vehicles:
Évaluations
Rated 4 de
5
de
JonInNB par
Good price
Basic steel sprocket. Installed one on a 250R and it's holding up well so I decided to put another on my 250 dual sport. No complaints.
Date de publication: 2016-08-17
Rated 5 de
5
de
JP0160 par
It's a sprocket.
Fits a 2015 CBR300R without issues. Order the 13T if you want more wheelie juice.
Date de publication: 2017-08-26
Rated 4 de
5
de
Zemmer par
Machined true Great response
Fit perfect, has great response, runs true and tight
Date de publication: 2018-07-23
Rated 5 de
5
de
kickstarter par
made very well
it fit nicely and it was everything i expected it to be for my 2020 crf250f
Date de publication: 2021-06-18
Rated 5 de
5
de
Rastusoh par
What a difference a tooth makes.
My front sprocket was beyond worn out and this seemed like a reasonable replacement. Went with a 16 tooth as opposed to the 15 tooth stock sprocket. What a difference on the highway, lower rpms, better gas mileage.
Date de publication: 2016-03-25
Rated 5 de
5
de
Meiron par
Its a sprocket!
Its a roundish thing with a hole in the middle and teeth around the edge
Date de publication: 2016-05-05
Rated 1 de
5
de
MTRCYCLS par
Does Not Fit CR250R
Fortnine says recommended sprocket would fit a 2004 CR250R but it doesnt! Be careful!
Date de publication: 2019-02-09
Rated 5 de
5
de
interpic par
bonne pièce ..! et service rapide bravo fortnine
Date de publication: 2018-07-24
Questions
Would it fit for my 2014 klx 250s Thanks!
Yes. If you enter the year, make and model of your vehicle on the product page, you will be able to order the vehicle specific part for your bike
Date de publication: 2020-11-19
I have a 94 KLR650, and it uses a locking plate on the drive sprocket. I am having a hard time finding the plate as Kawasaki has discontinued the part. Do you carry this part?
Reuse the old one by bending the lock tab on a side that hasn't been bent yet. Otherwise, use any company's lock tab as long as the center whole is the same size and the tab doesn't interfere with anything when bent. This is not a part that must come from Kawasaki.
Date de publication: 2016-10-21
on a 2008 klr650 which side is mounted against the bike? and are there any shims required
The high side that sticks out goes toward the bike.No shims are needed.
Date de publication: 2024-09-16
Hey fortnine do you offer the jt sprocket with the o ring built into the sprocket?
The same on my 2014 675R. I use it for track only and it makes no difference at all.
Date de publication: 2024-03-28
Will this fit with a 530 chain ? I guess I need a thick chain for a Yamaha R1, Need a matching rear 45T sprocket aswell and a Chain that will fit thank you !
Yes these sprockets fit a 530 chain. I bought them for my ZZR 1200
Date de publication: 2016-07-20