Produits similaires Voir d'autres produits d'intérêt
Puig - Visière à Clip pour Pare-Brise
164,99 $ - 180,99 $
Puig - Visière à Clip pour Pare-Brise NUMÉRO D'ARTICLE # 264614
Description
- Visière multi-réglable offrant une protection additionnelle contre le vent
- Le système Clip-on permet le montage sans devoir percer le pare-briser
- S'installe sur pares-brises de 3 à 5 mm d'épaisseur (0,12po à 0,2po)
Numéros de pièce for Puig - Visière à Clip pour Pare-Brise
Videos
Videos
Évaluations
Rated 5 de
5
de
Jimbo par
Works great.
Super easy to adjust. Moves the air stream and diffuses it over my head now, instead of hitting the top of it. Much more comfortable when riding at higher spends ( +100km/h )
I now know what I need in my next windscreen
Date de publication: 2017-10-27
Rated 3 de
5
de
Kevlar par
good product support form Canada's motorcycle puig
Works changes air management. Adds comfortable Pocket of air and delflects smaller bugs.
Date de publication: 2015-07-26
Rated 5 de
5
de
Elt666 par
great product
Purchased at the start of a 7000km, 8 day trip for a Hayabusa with raised bars. Really reduced wind on the neck area with no noticeable handling impact, tested to 240kmh. Will purchase another for my wife's Triumph.
Date de publication: 2016-12-16
Rated 4 de
5
de
Markdog par
Works Great
Over twice the cost it should be BUT worth it because it works so well. Cut noise and buffeting down 80%. I don't feel the need for ear plugs now but still wear them for longer high speed trips. The middle 25cm wide one just fastens on stock NC750x windscreen. Mounting width about 20cm same width as top of screen. Adjustable when weather gets warm and may want more wind blast. Solid and well made.
Date de publication: 2020-05-18
Rated 5 de
5
de
Mudikon par
Just what I needed
At 6'2" on my R1200GS with Vstream tall windshield I had terrible buffeting and noise at highway speeds. The wind just caught the top of my helmet and the top of my visor. I added the clip on visor as an attempt before trying another windshield. This thing is great, eliminated all buffeting and noise, I can run at 110Km/h without earplugs for hours.
Date de publication: 2017-08-20
Rated 4 de
5
de
John par
Puig clip on visor
I bought this to add on to a Slipstreamer Spitfire windshield that is attached to a Yamaha WR250. Without it, the wind off the windshield hits me mid visor and the wind roar is loud despite a quiet helmet (Shoei RF1200) and ear plugs. I noticed on my last camping trip that if I put the width of my hand on top of the windshield the roar went away. I decided to take a chance on the Puig despite that it cost way more than the windshield and I'm very pleased with the result. The wind blast now hits the top of my helmet as it should and as long as I keep my head centred, I'm sitting in a quiet pocket. I now can hear the engine clearly.
Date de publication: 2015-08-09
Rated 4 de
5
de
jstgermain256 par
Works!
I purchased this to reduce the massive wind buffeting my windshield creates. I was developing tinnitus even with earplugs.
I picked the largest one, and it considerably reduces wind noise. I hear my engine at highway speed now and I can now have my visor open up to 90 km/h now.
It is not perfect though, as it shows when there are frontal winds. It slightly affects the stability with high winds. The provided screws did not fit; I had to enlarge the holes with a drill. It is quite expensive as well.
The look? Not super on my bike, but I don't really care.
Most importantly it does not hinder my view, it is sturdy and is quite a quality product. I am satisfied as I appreciate more the ride since my purchase.
Date de publication: 2022-11-08
Rated 5 de
5
de
Flick par
No buffeting
Found the stock screen inadequate on the NC750X, so purchased Honda’s higher windscreen. Better, but not quite there yet! So i purchased the Puig clip-on visor, and 3rd time’s the charm! No headwind buffeting, just clean air at the helmet. Perfect! Follow install instructions and its an easy job. Just be cautious when adjusting angles of the visor; two hands and push up firmly, but never attempt this maeuvour while riding ( you’ll most likely break the visor!). Perhaps a little pricey, but it works!
Date de publication: 2022-06-01
Questions
Has anyone tried this on a stock 2011 ninja 650 screen?
We are unable to comment on the fitment on your specific bike, but the part is pretty universal, mounting on shields that are between 3 and 5mm thick (0.12in. and 0.2in. thick). As long as your shield is within those dimensions, you shouldn't have any issues installing this.
Date de publication: 2023-08-01
how wide apart are the mounting points on the Puig 315mm model
The mounting points on all of the Puig clip on visors are the same. The mounts are adjustable, and can be adjusted to fit windshields between 3 and 5mm thick (0.12in. and 0.2in. thick)
Date de publication: 2024-07-08
Has anyone installed this to a Yamaha V-Star Silverado 1100? If so how did it work?
We haven't mounted it to this specific vehicle, but it is a pretty universal fitting item. Mounts on shields between 3 and 5mm thick (0.12in. and 0.2in. thick). We would recommend checking out other customer reviews. The bikes ridden by these customers will be listed
Date de publication: 2021-04-24
Bonjour, Pour ajuster l'angle, faut-il dévisser ou simplement appuyer fermement, car les têtes de visse ce sont brisées ?
Ce ne sont pas des vis, mais des points de pivot. Le réglage s'effectue en manipulant les pièces et en les faisant passer par les détentes/cliquets, qui peuvent être assez rigides. Les pièces tournent de 180 degrés de haut en bas sur les deux pivots. Ajustez la position de la visière en premier et ensuite, installez-la sur la moto.
Date de publication: 2021-12-17
Are the clamps that attaches to the windshield rubber mounted? In the video it looks like metal crews are contacting the actual windshield. I'm I seeing that right? I need one of these deflectors but I don't want to damage my windshield in any way.
No worries. There are 2 clear pads on each side of the clamps that grip the windshield. Windshield will remain unscarred. Cheers
Date de publication: 2019-07-03
I have the Puig touring screen on my 2016 BMW R1200 RS, and am interested in adding this visor. I’m wondering if it will fit on my screen, as the top of my screen is a V-shape (not sure how to add a picture, but it’s the “Touring Screen” on the Puig site)
Yes, this visor will fit on your Puig Touring Screen. You just need to be sure to order the appropriate width. It should mount to the designated points highlighted in this photo: http://imglin.com/hQE9YFphq8.png
Date de publication: 2024-07-03
Hi, how do you adjust the angle/height?
It’s on 2 double-hinged arms, you just pull/push for height, twist for angle.
Date de publication: 2020-11-17
So ... how do I decide which one will be the best fit for me? I have a Puig "Naked New Generation Touring" windscreen installed on my Vulcan S. I'm 5'5" (163 cm) and the wind currently hits my chin and goes straight up into my helmet causing noise.
Basically the wider you can go the better the wind channel.
Date de publication: 2024-07-19