Produits similaires Voir d'autres produits d'intérêt
NUMÉRO D'ARTICLE #602265
Vortex - Protections de Cadre V3 2.0
40,99 $ - 343,99 $
Vortex - Protections de Cadre V3 2.0 NUMÉRO D'ARTICLE # 602265
Description
Caractéristiques :
- Les glissières du cadre Vortex V3 2.0 sont équipées de zones de flexion contrôlée et d'un système de protection intelligent conçu pour garantir que les glissières se plient dans certaines zones afin d'augmenter la préservation de la moto en redistribuant la force d'impact loin du cadre et du corps du moteur
- Des éléments en aluminium résistants (classe d'alliage 2017) garantissent que l'ensemble du système de protection résistera aux conditions de course les plus difficiles
- Les glissières du cadre V3 2.0 sont anodisées en noir mat pour éviter la corrosion
- Les palets d'impact moulés sont fabriqués à partir d'un matériau spécial breveté absorbant l'énergie
- Les glisseurs de cadre V3 2.0 sont fabriqués avec précision sur des machines à commande numérique, chaque kit de glisseur de cadre est conçu pour s'adapter à des modèles de vélo spécifiques. Aucune pièce supplémentaire n'est nécessaire pour assembler ce produit lorsqu'il est acheté correctement
- Des instructions de montage détaillées sont incluses, Vortex recommande que ses glissières de cadre V3 2.0 soient installées par un mécanicien de moto certifié
- Des modifications peuvent être nécessaires en fonction du kit et du véhicule sélectionné
Numéros de pièce for Vortex - Protections de Cadre V3 2.0
Fitment for Parts Vortex - Protections de Cadre V3 2.0
This part fits the following vehicles:
Évaluations
Rated 3 de
5
de
Andrew par
Sturdy Product - Minor Installation/Part Hiccup
I got this product for my Z650 and overall I am happy with its looks and functionality, but I encountered troubles with installation and hopefully this helps anyone looking to use these.
The biggest trouble I had with this was the installation. I have never installed bike protection equipment before and from the videos I had seen they mounted directly on the frame bolt, not using a spacer like this (see pictures for reference). The instructions aren't incredibly intuitive either and having no video tutorials for this exact part didn't help.
Aside from wrapping my head around how this whole thing is installed, the nuts for the long bolts weren't the correct size (two black nuts in part picture) and felt like it was cross-threading the new bolt. On-top of that, the new nut supplied for the long bolts were flanged, unlike the original OEM nuts, so it literally couldn't physically fit in the rather tight spot for the nut. I had to go to my hardware store and purchase two M10 x 1.5 locking nuts which were a perfect fit - I didn't and still don't understand how this integral part of the upgrade was off in every aspect, especially since this kit was specifically designed for all year models of the Z650. Bizarre...
With the issues I encountered, I would still recommend these sliders. I haven't had the unfortunate chance to try these, but if drop the bike or anything like that I'll be sure to update this review.
Date de publication: 2021-04-12
Rated 4 de
5
de
walker par
Saved my Bike
First month riding I got caught in a torrential downpour of rain. When turning right around a sharp bend my rear tire slipped out and my bike slide about 5 meters. The right frame slider took most of the damage. Only other thing that took a scratch was my bar ends and a bit on the exhaust. No plastic cladding was damaged. Worth the money. However getting replacement rubber ends is a bit of a pain.
Date de publication: 2019-08-28
Rated 1 de
5
de
DanDLion par
Fortnine remove inferior product from site
Bought this for 2013 zx6r and have same issues with the provided hardware.
Left side needs m10 1.25 50mm not 70mm that is provided
The shorter 60mm used on right side but stripped the thread now it won't tighten at the end.
Going to ask for my money back from fortnine. Avoid these frame sliders at all costs. They are pure garbage.
Date de publication: 2022-07-30
Rated 5 de
5
de
Abe Wong par
Great Street Sliders with no drilling/cutting
Put these on my 2017 R3. Worked Great, looks clean. Only advice I have for prospective buyers is make sure you match all your screw lengths correctly as there are some slight variations between the left and right side.
Date de publication: 2018-06-17
Rated 4 de
5
de
Henning par
expensive
The one bolt was hex head the other allen, didn't like that . Expensive for what it came with.
Date de publication: 2018-08-25
Rated 1 de
5
de
doowhoowdelayhehoo par
Scam
Received random bolts that were not the same as in instructions. All the packaging was loose everything was sliding around. Spacers are too big, bolts I was given won't reach threads on the frame (could cut spacers to fit). Purchased for my CBR-250R 2012, since it presented itself as no-cut fairings. Which isn't the case, assuming I have to cut my fairings, since it collides, which I refuse to do. Looking at other reviews from other sources, they fail in crash and damage frame. Vortex is overpriced garbage presenting itself as racing grade, will never purchase from them again.
Date de publication: 2019-07-03
Rated 3 de
5
de
Review par
Not a fun install
Seem okay quality wise. Directions weren't super clear and they weren't a fun big install
Date de publication: 2024-07-26
Rated 3 de
5
de
Keadyn par
Good, but...
The one side of the bike was 100% perfect, easy install. The other side however, the bolts were the wrong size to secure it to the frame. Instructions were a bit hazy too so it took a while for me to realize that the kit had the wrong hardware and i wasnt just installing it wrong. Was pretty frustrating for something so simple
Date de publication: 2024-05-15
Questions
Packs contains 2?
This is a kit, so it includes 2 frame sliders, as well as the other parts you need for installation. Once you enter the year, make and model of your vehicle on the product page, the vehicle specific part will be recommended, and you will be able to view the installation instructions for your application
Date de publication: 2019-08-05
Is this a cut or no cut frame slider kit?
Depends where your slider mounting holes are in relation to your fairings.
Date de publication: 2023-08-10