Andrews 26H Chain Drive Camshafts - 216326

• Splined chain drive camshafts
• Kits include: cams, 1 roller bearing and 1 ball bearing (bearings only included in 1999-2006 models)
• Designed for use with stock Harley-Davidson hydraulic lifters
• Can be installed on both carbureted and fuel injected models
• Bolt-in cam for lower rpm torque on heavier bikes
• For two-up touring
• Good power from 1800-5500 rpm
• Can be used with stock springs and tappets
• NOTE: Installer must check coil bind, valve-to-valve clearance and valve-to-piston clearance
• Intake Opening (degrees): 11
• Intake Closing (degrees): 35
• Exhaust Opening (degrees): 41
• Exhaust Closing (degrees): 09
• Intake Duration (degrees): 226
• Exhaust Duration (degrees): 230
• Intake Lift (in): .490
• Exhaust Lift (in): .490

Instructions