Andrews 57H Chain Drive Camshafts - 216357
$524.99
Andrews 57H Chain Drive Camshafts - 216357 Item # 210413
Description
- Splined chain drive camshafts
- Kits include: cams, 1 roller bearing and 1 ball bearing (bearings only included in 1999-2006 models)
- Designed for use with stock Harley-Davidson hydraulic lifters
- Can be installed on both carbureted and fuel injected models
- Specially designed for 103-110in. engines
- Bolt-in low RPM power galore for heavy bikes
- NOTE: Installer must check coil bind, valve-to-valve clearance and valve-to-piston clearance
- Intake Opening (degrees): 18
- Intake Closing (degrees): 38
- Exhaust Opening (degrees): 46
- Exhaust Closing (degrees): 14
- Intake Duration (degrees): 236
- Exhaust Duration (degrees): 240
- Intake Lift (in): .560
- Exhaust Lift (in): .560
Part Numbers for Andrews 57H Chain Drive Camshafts - 216357
Reviews
Rated 5 out of
5
by
T Brown from
Best cams for a stock 103, hands down
These cams really wake up an otherwise stock 103. Some cams deliver power in the lower RPM range and other cams in the higher RPM range. These seem to deliver more power right through all ranges. 57H's have a lift of .560 which is about as high as you can go without changing valve springs. Great power. The only downfall is that since they are not a Screamin Eagle product, the Harley dealer will want you to pay for a dyno to tune the air/fuel ratio. Without a dyno, they have no data to program into the fuel injection computer because it's not a Harley product
Date published: 2016-02-06
Rated 5 out of
5
by
DanD from
Great 103 Stage 1 Cam
These cams pull very hard from 2500 RPM on. Before that the bike feels the same as before the cam install....but after 2500 these pull all the way to redline without falling off like some bottom end cams do. Since most riding is in the 2500-4500 rpm range, this is the cam for that rider that wants roll on power without having to downshift. Pulls hard in every gear....even 5th and 6th. Get ready and be careful...speeding tickets might be very easy to come by after installing these!
Date published: 2017-11-25