Antigravity Micro-Start Smart Clamps - Newer XP-1, XP-3 - AG-MSA-11TP

These are replacement mini clamps for the NEWER models of the MICRO-START AG-XP-1 and AG-XP-3. These SMART jump-start Clamps have additional safety features built-in for full protection. The clamps also have a stronger plastic clamp joint where previously it was a metal pin.

Safety Features:

• Reverse polarity protection: Protects from connecting the Smart Clamps in reverse polarity. The clamps will not allow User to Jump Start and will Notify User with RED LED Flashing
• Short circuit protection: If the Smart Clamps touch or are connected together accidentally the clamps will disconnect immediately and not allow Short-Circuit
  • If the BOOST BUTTON is pressed this will BYPASS the safety features of the Smart Clamps. Use CAUTION and make certain Clamps are connected correctly at Battery Terminals BEFORE pressing Boost Button
• Reverse current protection: If the clamps are left on the vehicle, the Reverse Current protection will not allow a Back-Charging into the MICRO-START. In any case we still suggest never leaving the unit connected to a vehicle more than 30 seconds after a Start
• Over current protection: If the current exceeds 600 amps the Smart Clamps will shut down automatically protecting the unit from damage
• Over discharge protection: When the output voltage of the MICRO-START is less than 10 Volts the clamps will not allow jump starting or further amperage discharge from the clamps
• Thermal protection: Protection against over-heating of Clamps due to Over-Cranking of Vehicle which can generate high heat and damage unit. The Smart Clamps will sense high heat and shut off Clamps

Compatible with:

• AG-XP-1 (New Design)
• AG-XP-3 (New Design)

Safety Notes:

• The MICRO-START is for Jump-Starting ONLY through the Jump-Start port!
• Never leave the MICRO-START connected to your vehicle's battery for longer than 30 seconds, or use in place of your regular battery in your vehicle
• Do not try to charge the MICRO-START directly from your battery through the jump start port. Severe damage can result!