BikeMaster 1 Liter Pneumatic Vacuum Brake Fluid Bleeder - 152188
$84.99
BikeMaster 1 Liter Pneumatic Vacuum Brake Fluid Bleeder - 152188 Item # 281052
Description
Features:
- Recommended PSI rating 70-110 psi
- Quick and easy way to bleed those nstubborn brake lines
- Takes less time to extract air bubbles from the brake system
- Catch bottle has 1 liter capacity
- Dual attachment allows you to bleed dual disc applications
- A must have for the tool box
- Sold each
Part Numbers for BikeMaster 1 Liter Pneumatic Vacuum Brake Fluid Bleeder - 152188
Videos
Videos
Reviews
Rated 5 out of
5
by
FlyMode from
Makes Breaks EASY!!
Honestly amazing tool, for the price alone it will save you shop costs. 5 mins a line, its that easy hang it up! Suck the old fluid out of the res (leave enough in to not pass air in the lines.)top res up with fresh fluid, crack the lines open and suck, keep topping up the res, once it comes through clear (or as clear as your fluid is) into the waste container attached to the gun, close the line and top up your res all the way and you'll have perfectly cleaned break lines!
Date published: 2019-01-15
Rated 5 out of
5
by
Pedro from
Best tool I bought in a long time
Do it! you need this...Just call me and I'll bleed your brake lines on all your bikes for a few beers!
Date published: 2018-11-14
Rated 5 out of
5
by
BCTW200 from
Worked great!
I bought this a month or so ago to properly bleed the front brake of my bike. It set up easily (you need to buy the proper air chuck piece to thread in for hooking up to your air compressor), and worked a real treat for completely draining my brake line, allowing me to take the caliper apart and rebuild it. Once I had it back together, I used it at a low 25 PSI setting to gently replenish and bleed my brakes, and it couldn't have been more straightforward to use.
I've read that you're supposed to keep the catch bottle and handle higher than the bleed hose when in use, so I made sure to do so, and it worked great. Because of the internal diaphragms and components, I gave it a really good wash after using it by dunking the bleed hose into a bucket of water and running at least a half litre through it to neutralize any brake fluid that might've been left inside.
For what you pay, I thought it was a tremendous value and kept the brake job an easy chore with no fuss.
Date published: 2021-02-02
Rated 5 out of
5
by
Go West87 from
Works like a charm
Bought this to do a brake fluid flush on my Honda Shadow VT750C. It was very easy to use and worked very well. My air compressor is 8.3 gallon, 3.5 scfm, and 100 psi max; i'd say it was just big enough for the job. Any smaller of a compressor may start to make it more tedious. My dad used it on his much more complicated Honda ST1300 and it also worked perfect for him. We both did the jobs by ourselves too.
Date published: 2018-07-31
Rated 5 out of
5
by
Arnax from
A breeze to bleed
If you bleed your clutch/brakes yourself and have a compressor, you need this. It makes it a fast and easy one person job. When I recall the endless pumping with tie-wraps, I wonder why I didn't get this years ago...
The box includes an adapter to bleed only one line, that's how I use it, one caliper at a time for front brakes.
Date published: 2018-05-13
Rated 5 out of
5
by
vince1675 from
Works on everything
My only regret is that ive waited so long for this tool. Did all the bikes, truck and car in a flash. Only point for improvement is that the instructions lack the psi required for function so i begun at 15 gradually going up to 30 and it works perfectly.
Date published: 2019-08-27
Rated 5 out of
5
by
InvisibleMissle from
Fast and Convenient
I can’t believe how easy a brake bleed is using this device. I used it on my bike and my friends with no problems. Only thing I would suggest is they add a plug for the second tube for when you only do a single caliper, as you lose a bit of pressure.
Date published: 2018-03-26
Rated 5 out of
5
by
Matchlessmc from
Invaluable!
Perfect for those who have a compressor and want to do their own brake line flushing.
Simple, easy to use and very quick.
If you only have a single front brake, you will need to block one line to maintain the vacuum. I used a piece of electrical tape. Worked fine.
Date published: 2021-04-24
Questions
Does this unit require a compressor or a vacuum pump?
Yes it does
Date published: 2019-01-29
Will it do car brakes as well?
Well this product enable me to do a brake fluid change on a VFR800 with combined braking system/ABS without any help?
Yep. Just hook up, start sucking, and add fluid into the reservoir to maintain the level.
Date published: 2023-03-16