BikeMaster Adjustable Steering Stem Wrench - 152271
$80.99
BikeMaster Adjustable Steering Stem Wrench - 152271 Item # 281126
Description
Features:
- Correct tool for removal and installation of steering nuts
- Adjustable jaws range from 25mm-75mm
- Black oxide coating for durability
- 3/8in. drive receiver allows use of your favorite ratchet
- 11-1/2in. in length for the torque you need
- Sold each
Part Numbers for BikeMaster Adjustable Steering Stem Wrench - 152271
Reviews
Rated 2 out of
5
by
Islandrider from
Can't recommend
Pros
May be used for steering head nut and shock preload for multiple motorcycles
Readily available in Canada
Cons
Qualify of construction is not great
Easily slips off steering head nut when pressure is applied
The handle makes it difficult to use in limited space around steering head
Difficult to use with a torque wrench
Last Word
Next time I will be using a castellated socket on the steering head nut.
Date published: 2022-12-19
Rated 2 out of
5
by
Burn from
Resembles the one I had for 15 years
I am glad I was able to replace this tool but the quality is mediocre. The adjustment gear and guide is just not nearly as good as the one I had. Maybe with use it will smoothen a bit but it's movements are clunky compared to the old one sadly. So as a replacement for a tool you need once a year; Sure!
Date published: 2021-10-18
Rated 5 out of
5
by
Tzmndvl from
Works like a charm
This tool prevented any damage and worked beautifully nice adjustability for use on multiple bikes.
Date published: 2015-10-17
Rated 5 out of
5
by
Lannister from
Works for adjusting suspensions too
I use it to adjust suspensions. More practical than having multiple spannners.
Date published: 2022-12-20
Rated 5 out of
5
by
KensWorld from
Best tool for the job - just expensive
This is THE tool to have in your box of goodies when it comes to doing the steering head bearings. The fact that this wrench has a slot opening for a socket is perfect for using a torque wrench when tightening. As a bonus, I was able to use this wrench on my rear shocks to adjust the preload.
Date published: 2022-08-31
Rated 5 out of
5
by
Ian1 from
Excellent Tool
This tool is good quality, and does the job perfectly. I don't know why I waited so long to get one.
Date published: 2022-05-02
Rated 4 out of
5
by
Laffy29 from
Does the job.
5 stars for what it does but 4 because it is expensive for what it is.
Date published: 2022-02-23
Rated 5 out of
5
by
Ross from
Just what I needed
Had to lube and adjust steering head on my ZX14R. Worked great!
Date published: 2021-08-22
Questions
Can this item be used to Adjust your rear shock preload as well?
A great addition to your track day toolbox for sure. Yes, it can be used to adjust shock preload collars. I use it mostly on my track bike Ohlins TTX shock and works like a charm. Only draw back is that you do need the room and clearance to use it. If you have a Ducati super bike like the 848, 1098, 1198, then good luck as there is no room from either side of the bike to be able to access the collars on the shock without having interference either from the frame, the exhaust, or the shock reservoir. Other than that, a great tool. Works great on triple clamp stem nuts as well.
Date published: 2023-11-06