Similar Products See other products of interest
BikeMaster Handlebar Risers Item # 281355
Description
Features:
- We are all made differently and getting your bike to fit you is always a challenge
- Kits come with multiple segments, so that you can get your handlebars right where you want them
- Sold in pairs
Part Numbers for BikeMaster Handlebar Risers
Reviews
Rated 5 out of
5
by
Toyman from
Got a rise out of me!
Just the thing I needed to improve the standing ride position for a 6' rider on a Honda CRF 230F.
Great price, easy to install, no mods or cable extensions required. Amazing the difference it made!
Date published: 2016-11-23
Rated 5 out of
5
by
Bob T from
Risers for my 1992 Honda ST1100
I am getting older and found that it would be nice if the handle bars could be back a bit and a little higher. I needed new brake and clutch lines, so went to steel braided ones. They added an extra inch to each just in case. Works great, feels much more comfortable.
Date published: 2017-12-12
Rated 5 out of
5
by
La mop from
Good fit
I needed just a bit of a reach ( short arms ) to get a more comfortable stance on my bike, these risers work perfect. I have spent a lot more money on bar risers in the past that do the same job yet these even have a good range of different heights and look descent on my bike.
Date published: 2017-09-17
Rated 5 out of
5
by
Christian from
good for your back / bon pour le dos
I bought this kit for lift my handle. On suzuki v-strom (2015) is possible to raise the bar 2 inches if I pass few cable out of the support.
I decide to raise the handle 1' 3/4 and I have more spacer for going more high, with this kit is easy for make the job many bolts are provide with it with different lenght, and I verify the tork specification for my motorcycle for finish the job. This modification are not expensive compare to the competition.
J'ai acheté de qui pour monter les poignées de la moto, (Suzuki Vstrom 2015) sur ce modele il est possible de les levés jusqu'a 2 pouces en passant les cables en dehors de leur support.
J'ai décisé de les monté de 1' 3/4 meme s'il y a asser de"spacer" pour aller plus haut. Avec ce kit il est facile de faire la job, il y a des bolts de différentes longueur tout dépendament comment on leve les poignées. j'ai passé les cables (ceux qui étaient cours) en dehors de leurs support et j'ai verifier le tork des bolts pour finir la job. Ces spacer sont bien fait et ne sont pas cher comparer à d'autres que j'ai vu ailleur.
Date published: 2016-08-13
Rated 4 out of
5
by
The Singer from
Bar risers
Inexpensive, variable height, and bolts to accomodate. Satisfied.
Date published: 2016-06-26
Rated 5 out of
5
by
LeoP from
Great product
I had this riser installed at the maximum height. Briefly tested for a few rides but it seems perfect and gives a much better standing position since I'm 6'. Cheap solution, worth a shot.
Date published: 2015-06-02
Rated 5 out of
5
by
Richard from
BikeMaster Handlebar Risers
I'm finally able to enjoy longer rides with a more comfortable riding position. The fit and finish of the machining is top notch. It was very easy to install. They supply plenty of different length bolts for any of the risers height configurations. Luckily I was able to use all the segments for the full 1.5 inch height. I ordered two sets. One went on a Honda NC700 and the other on a Honda CB500. Again, I was pleased with their very reasonable prices and speedy shipping.
Date published: 2016-06-25
Rated 3 out of
5
by
up3979 from
Does part of the job
Got this kit to raise the bars on my GSX650F, and it does a small part of the job. I've been able to raise the bars about 1" using one riser from the basic kit, but to raise it any more will require changing out and lengthening the clutch line, the front brake line and all electrical connections to the controls on the bars. To protect my five-year warranty and personal safety I'll have to have that part done by a Suzuki factory mechanic - about $400, I reckon.
Date published: 2015-08-08
Questions
Will this fit a 2006 Suzuki s40 boulevard (savage) with 10mm diameter bolts?
Unfortunately, the only sizes available for the BikeMaster Handlebar Risers is 7/8", 1", and 1 1/8".
Date published: 2019-09-23
What is the max rise you can get out of the kit? I was hoping for 3 inches, would I need two kits? And if so, do they supply bolts long enough?
Raises handlebars 1", 1 3/16", 1 3/8", and 1 1/2". The bolts supplied would not be long enough
Date published: 2019-10-11
Will these fit a Honda Shadow Spirit 1100 ace with 1" handlebars?
This is a universal item, so there is not specific fitment information for specific vehicles. If you have 1" diameter bars, you would need to select the 1" option
Date published: 2019-09-30
will this fit my 2008 klx450r with protaper fat bars
Yes it will. I have the ProTaper fatbars. fits like a charm.
If you use all the spacers, the bolts shipped with the package are too short. I had to go buy new/longer bolts.
Date published: 2017-07-03
Will these Risers fit on a 2011 Harley Davidson Street Bob (FXDB)? If so, will I need to change any cables, break line or wireing?
This is a universal item, so there is no specific fitment information for specific vehicles. Select the size that matches your handlebar diameter. As for extending your cables, you would need to check the length of your current cables and how much slack you have.
Date published: 2023-11-22
Will these fit a 2003 Yamaha Virago XV 250 with 7/8" bars? And if not what model will? Thanks
Japanese bikes typically have handlebars 7/8” in diameter. So yes, if your bars are stock these will work for you. The beauty is you can use as many pieces as you want or your cables will allow. I am happy with mine on a Suzuki DRZ 400SM.
Date published: 2019-09-19