Similar Products See other products of interest
Burly Easyboy Clutch Kit Item # 488775
Description
Features:
- Reduces effort required to pull clutch lever by 40%
- Lessens rider fatigue and provides smoother, easier clutch action
- Ideal for in-town, stop-and-go traffic
- Fits inside the primary cover on Sportster models, and the transmission cover on Big Twins
- Extends the clutch operating mechanism for improved leverage
- Can be installed in under 30 minutes
Part Numbers for Burly Easyboy Clutch Kit
Fitment for Parts Burly Easyboy Clutch Kit
This part fits the following vehicles:
Reviews
Rated 5 out of
5
by
Clammy from
Even Better Than Expected!
I was running the HD easy pull clutch ramps (18 degree) with Screaming Eagle clutch spring, in my 2005 Night Train, which has a built engine (~ 100hp/115 ft-lbs). The pull was lighter than the stock setup, but not feather light. I need to use the SE spring because the engine puts out enough torque to cause the clutch to slip with the stock spring. The one problem I had with this setup was adjusting the clutch lever to my liking. I like it to start to engage right off the grip. The problem was that when adjusted like that, it dragged a lot, and getting into neutral when stopped with the engine running was almost impossible. So, I decided to go back to the stock 21 degree ramps to get more disengagement. The stock clutch pull, before the SE spring was heavy, and I knew that going back to the 21 deg ramps + the SE spring would give me a brutally heavy clutch pull, so I decided to try this kit, and boy does it ever deliver!! The clutch pull is even easier than when I had the 18 deg ramps installed, and now I can adjust the lever to where I want, the drag has been eliminated, and when I'm at a stop light, I can easily flick the transmission into neutral. I should have done this mod YEARS ago!!
The install is dead nuts simple if you have a little mechanical ability and the tools. A shop manual is highly recommended, but not absolutely necessary.
Date published: 2017-06-28
Rated 5 out of
5
by
Speedy from
Works great
Easy to install, did not have to remove the exhaust either. Clutch pull is much lighter now and easier on my hand which has lost some strength from shoulder surgeries.
I did have to re-adjust the clutch and clutch cable, which only took and additional 20 minutes. Overall, I'm pretty happy with the results.
Fort 9, are always great to deal with and fast shipping.
Date published: 2018-05-28
Rated 4 out of
5
by
Hollywood from
Good Investment
Good product. I’d say 30% lighter in the clutch which was an easy install. Monster clutch pack Big Bore so it is nice mod!
Date published: 2018-05-09
Rated 5 out of
5
by
Maybe from
I have used this product before. it's easy to install & works very well.
Date published: 2018-02-19
Rated 5 out of
5
by
Hound Dawg from
I had the Burly easyboy clutch kit installed in my Ultra. Much easier clutch pull and makes it easier for my left wrist which has pins and a plate from a motorcycle deer collision back 11 years ago.
Date published: 2017-06-24
Rated 5 out of
5
by
Nudge from
Exactly as ordered
Great service and quick shipping as always. Good to be buying from a Canadian site
Date published: 2017-05-17
Rated 5 out of
5
by
hotrodwally from
Easy pull clutch will save your wrist .
I bought this item , it was an easy install , I did have my exhaust pipes off at the time which made the job easier , I also lubed my cables and the levers . Lube your cables a few times per year .
Date published: 2017-05-06
Rated 4 out of
5
by
Woody from
Easy to install
Ordered initially on Amazon, got an email 2 weeks later that they could not fulfil order. Checked Fortnine and was in stock and cheaper. Win win
Date published: 2022-09-15