Similar Products See other products of interest
Drag Specialties Tour-Pak Latch Hardware Kit - 3516-0192
$37.95
Drag Specialties Tour-Pak Latch Hardware Kit - 3516-0192 Item # 477071
Description
Features:
- Complete kit, includes everything necessary to install latches for your Tour-Pak
Specifications:
- Please note that the screws are self tapping - there are no threads on the latch
- MADE IN THE U.S.A.: No
- TYPE: Hardware
Part Numbers for Drag Specialties Tour-Pak Latch Hardware Kit - 3516-0192
Reviews
Rated 2 out of
5
by
Janny from
Product arrived on time and was packaged well.
I was not impressed with the mounting system however. The screws did not thread into the part of the lock mechanism very easily. There was no thread cut into the female socket. Consequently one of the nipples that are meant to expand and secure the machine screw broke off and the screw is only holding by a few threads.
This probably will cause the latch mechanism to work its way loose and fall off.
Perhaps this is as due to my inexperience but I am not happy that this product requires a better than average knowledge of how to thread in the machine screws. I think I could design a more user friendly system.
Date published: 2021-10-27
Rated 5 out of
5
by
Carl604 from
great item
great item easy to install work and fit prefect looks great on my ride
Date published: 2022-03-30
Rated 5 out of
5
by
gpsuya from
Decent product. Compares well to OEM
Same fit & look as stock. Some have complained on the self tapping screws. Its important to take your time here. Install the screws to make the threads before you mount the latches. They are a tight fit. Be sure to back the screw out a bit every turn or so, to break the chip. They will not thread that far in before they bottom out.
Date published: 2024-11-11
Rated 1 out of
5
by
Barry from
White metal
It comes with self tapping screws and there white metal.
If you had tap and dye set would be no issue but screw broke immediately
Date published: 2022-08-09
Rated 1 out of
5
by
Mitts from
Not complete. Holes where not threaded.
The small holes that are to be screwed in where not threaded. I assumed it was self tapping. The screws broke off inside. Had to throw them out.
Date published: 2022-07-12
Rated 5 out of
5
by
Mechanic from
Direct replacement fit, easy to install, good quality.
Date published: 2020-03-27
Rated 1 out of
5
by
Brennan from
Trash! Get OEM
Spent 30min messing around with one “self tapping” screw that would not tap. Ended up breaking the screw. The OEM ones are threaded. What a waste of money. How do I get a replacement?
Date published: 2021-08-28
Rated 2 out of
5
by
mike from
overallquailty good except fastening screws.
i returned the latches because the screws were supposed to be self tapping and they were not . the oem and offshore are both pretapped.
Date published: 2021-08-01
Questions
I was wondering what the center to center on the holes for latches is. The fiberglass on the tour pack is broken. So hoping they are a bit wider then what was on there before.
They fit pretty close to original try tiny washers
Date published: 2019-09-30