Dynojet Auto Tune Double Channel Kit for Power Commander V - AT-300
$671.99
Dynojet Auto Tune Double Channel Kit for Power Commander V - AT-300 Item # 212255
Description
The Dual Channel AT-300 is designed for twin cylinder motorcycles and ATVs that use the Power Commander V allowing control of two cylinders simultaneously. The kit includes two O2 sensors, a control module with 2 sensor inputs, CAN termination plug, two cut-to-length sensor cables, and two weld-on bosses. It also requires a ground and 12 volt connection to be made using the supplied wiring hardware.
Features:
- Plugs directly into the Power Commander V with a single cable
- Patented Tuning Link dynamometer technology
- 18mm Bosch Wideband O2 sensor
- Constant air/fuel monitoring
- Automatically makes air/fuel corrections
- Adapts to ambient air pressure and temperature
- Compatible with Power Vision
- Made in the USA
Part Numbers for Dynojet Auto Tune Double Channel Kit for Power Commander V - AT-300
Videos
Videos
Reviews
Rated 5 out of
5
by
OGevocatX from
Easy install!
So for anyone that buys this it is a very straight forward install.. When I first installed it I wasn’t able to run the bike because I was waiting on other pieces (un related) but I thought there was an issue because the AFR was reading 486.7 all the manual says is in ambient air the sensors could read over 18 ..: I contacted dynojet they said that number is perfectly normal! So I suggested they re word their instructions! Other than that it works amazing
Date published: 2019-04-23
Rated 5 out of
5
by
Rob M from
Great adon to the PCV
I purchased this to hopefully stop my Victory CCT from stalling....
Unfortunately after the sale support from Victory is poor.....
The first run with the auto tune installed and the bike ran completely different.
The stalling has been eliminated.
This unit needs the PCV to be installed first. As it is an option unit for the PCV. That makes this a very expensive addition to your bike.
But it does work very well.......
Date published: 2015-07-05