Similar Products See other products of interest
Givi Top Case Mounting Hardware for E21 Cruiser and Trekker Series Top Cases - 1121FZ | Honda CB500X 2013-2022
$155.69
Givi Top Case Mounting Hardware for E21 Cruiser and Trekker Series Top Cases - 1121FZ | Honda CB500X 2013-2022 Item # 454868
Description
Specific rear rack for MONOKEY® or MONOLOCK® top case to be combined with the MONOKEY® M5 or M7 plates, or with the MONOLOCK® M5M or M6M plates / maximum load allowed 6 Kg
Manufacturer Part Number: 1121FZ
Givi ITL Number: 076-FZ1121
Part Numbers for Givi Top Case Mounting Hardware for E21 Cruiser and Trekker Series Top Cases - 1121FZ | Honda CB500X 2013-2022
Fitment for Parts Givi Top Case Mounting Hardware for E21 Cruiser and Trekker Series Top Cases - 1121FZ | Honda CB500X 2013-2022
This part fits the following vehicles:
Reviews
Rated 5 out of
5
by
Luca from
Sturdy!
Sturdy bars, nice fit to my 2013 CB500X. Doesn't come with the mounting plate's screws, as those are specific to each mounting plate. I was able to install the Givi universal mounting plate on these bars and it's been holding well (also using a Kappa Maxia 52 as a top case with that plate). The plate doesn't fit perfectly onto the bars, but you can make it work in a very specific angle, using 10mm bolts, nuts and washers.
The installation is easy, but can be annoying because if it's not level, you'll have to take everything off, add the included spacers and install again. Thankfully mine was somewhat level (albeit not 100%) on the first try.
Date published: 2021-05-11
Rated 5 out of
5
by
BobD from
Very easy install
This is probably one of the easiest accessories I've ever installed on a motorcycle other than a GPS mount. Installation is as simple as taking off the "passenger grab handles" and replacing them with these mounting rails. Once installed, they are rock solid.
Date published: 2020-12-25
Rated 5 out of
5
by
OntarioRider from
Works great
It's great. Very sturdy and looks good. You can easily make your own mounting plate. I like it a lot and would recommend. Install was easy.
Date published: 2020-06-25
Rated 4 out of
5
by
theralphman from
Seems very sturdy
Bought it month and a half ago. Instructions are not great. Found a video on YouTube that was good. One of the mounting barackets needed to be tapped for a bolt to thread. I never contacted seller as easier to tap it. Put lock tite on all the bolts. Has been very sturdy. Looks good on the bike. Would buy again and recommend it.
Date published: 2018-11-10
Rated 5 out of
5
by
SlickRick from
perfect for CB500x !
excellent ! excellent !excellent !excellent !excellent !excellent !excellent !
Date published: 2018-06-08
Questions
Will it fit all types of givi cases I have a givi monokey maxia 3
No, this rack is specifically designed for E21 Cruiser and Trekker Series Top Cases
Date published: 2021-12-29