Similar Products See other products of interest
Givi Support for Side Stand CB500X/Nc700/750 - ES1111
$58.99
Givi Support for Side Stand CB500X/Nc700/750 - ES1111 Item # 455314
Description
Specific support in aluminum and stainless steel to widen the surface support area of the original side stand.
The purpose of the range of Givi Base Extensions is to extend the surface area of the side stand, reducing the risk of a motorbike falling when it is parked on uneven surfaces such as; mud, sand, grass or asphalt during extremely high temperatures. Produced in anodized, milled and satin aluminium with the high support made of INOX 315 steel and designed with a hard technical aspect, the stand extension integrates perfectly with your motorbike.
Part Numbers for Givi Support for Side Stand CB500X/Nc700/750 - ES1111
Fitment for Parts Givi Support for Side Stand CB500X/Nc700/750 - ES1111
This part fits the following vehicles:
Videos
Videos
Reviews
Rated 4 out of
5
by
pvcodger from
Good Fit - But
Easy to install on my 2021 CB500X but there was an issue regarding the clearance with the centre stand.
When both the centre stand and side stand are in the up (off) positions the corner of the Givi extender hits the left arm of the centre stand. I'm thinking of filing back the rear left side corner of the Givi extender so that it clears the arm of the centre stand.
Date published: 2021-06-26
Rated 3 out of
5
by
llavalle from
Fit is average and thickness problematic...
Bought this for my 2014 NC750X. From the factory, I've always found the bike to be leaning a bit too much for my taste - figured this would help with the additional thickness. I also occasionally park on gravel / dirt so this could help.
On the plus side :
-Looks great
-Construction looks solid
-Installation was a breeze
-Works great on dirt
On the minus side :
-Comes with 2 shims - you put one on each side of the side stand base then clamp the whole thing. On my bike, the shims are a bit loose so they rattle around when riding.. which is very annoying. Added a dab of silicone to avoid this.
-Turns out the thickness is ok.. but it also adds surface to the INSIDE of the side stand... which makes the bike stand very straight on solid ground (pavement for example). Sit down on the bike with the kickstand out and the suspension sags and the bike gets completely vertical..
-Because of the additional weight - the OEM spring doesn't pull it as much when retracting which forces you to push back then up instead of just back which is awkward.
Overall - use this if you really need to park on loose ground... else just keep the oem one ;)
Date published: 2021-05-28
Rated 1 out of
5
by
UTurn from
Makes bike too tippy. Not recommended.
The GIVI side stand support, for the Honda NC750X at least, makes this bike far too upright and consequently very susceptible to tipping over with even a moderate touch by someone lightly bumping into it. Could not even park this bike on some streets due to their natural slant and was forced to use the centre stand more often than not.
Too dangerous and not worth a dropped bike so I took it off. NOT recommended at all.
Date published: 2017-08-09