Similar Products See other products of interest
Givi V37 Side Cases Item # 644676
Description
From a technical point of view the top shell of the V37 is a highly resistant structure as shown by the results of the numerous tests carried out. The internal capacity of 37 litres with a maximum internal load of 10kg is a notable increase compared to that of the V35 model and provides the added benefit of being able to store one modular helmet in each case. The ergonomic line of the V37 is also advantageous for the pillion who can position their legs more comfortably due to the compact size of the V37 case.
Finally, the 4-point MONOKEY SIDE fastening system, adopted on the V37 case, is designed to be compatible with all GIVI PLX and PLXR fastening systems.
Particular attention is also placed on safety; in fact this GIVI case is equipped with the Security Lock system and the lock barrels in a pair of V37 cases can be matched to other products within the GIVI range which are supplied with a Security Lock as standard.
Features:
- Highly resistant structure
- 4-point MONOKEY SIDE fastening system
- Security Lock Closure
- Integrated red or smoke reflectors
- Max Load: 10kg (22Lbs)
- Volume: 37 + 37 Liters
- Capacity: 1 helmet per each case
- Sold as a pair
Note: Compatible with Givi PLX and PLXR series racks only
Part Numbers for Givi V37 Side Cases
Videos
Videos
Reviews
Rated 4 out of
5
by
Ssalo27 from
Truthful review
In all reviews was says a full face helmet fit in it. So I spend more $ and get this ones. But. My XL helmet didn’t fit. Non of them. On my son toddler size fit.
Also straps to hold door is plastic and screws in to plastic. So in first week they was off.
Otherwise installation was easy. Boxes made from good material. Really solid. After riding in rain look like water get inside and was start make noises so need some oil.
Date published: 2021-08-02
Rated 5 out of
5
by
Jon Slice from
Great quality!
Givi makes amazing products. You pay a bit more for them, but I believe that slight upcharge in price is worth it. The V37 side case I bought replaced my OEM cases (Honda VFR1200). It has more room (37L vs 26L) and secures much better to the motorcycle specific frame (Givi PLX209) for my bike than the OEM did to the bike's built-in rails (I lost an OEM case because of this). The cases ship as a pair, and they include an extra lock cylinder if you decide to get a top case and have your Givi keys and locks all match. And that is exactly what I did - I ended getting the V47 top case. The quality of the case is typical of Givi - solidly built, and the fit and finish look and feel great. If you're serious about touring, Givi is the way to go!
Date published: 2021-05-06
Rated 4 out of
5
by
dnd047 from
Good cases; poor workmanship on mounting racks
I bought these cases for a 2017 BMW R1200R. Pricing from Fortnine was good, and delivery was prompt - within 48 hours. The cases themselves are well-made, but mounting them was difficult.
The bike-specific mounting rack (PLXR5117) mounts to the bike in 3 places - behind the passenger footpeg, onto the frame halfway between that footpeg and the luggage rack, and under the luggage rack. A mounting support is required at each location. In addition the mounting rack on one side is connected to the mounting rack on the other side by a rear bridge. See locations A, B, C and D on the attached instruction sheet. So each mounting rack requires four connecting bolts that come pre-mounted on the racks at those locations
First problem - one support that mounts to the luggage rack at location A (part 3) has two bolt holes, one round, one oval to allow for slight variations in tolerance. Despite this oval hole, the support on one side would not mount on the bike without enlarging the holes. Tedious hand filing.
Second problem - the bolts are intended to be inserted, rotated 90 degrees and snap into place, so they can be removed if the rack is to be removed from the bike. On one side that worked fine. On the other, the bolt rotated 90 degrees but would not stay in place. Must be defective. A quick email to Fortnine support and I had a replacement, over a long weekend, in a few days.
that replacement didn't work. The problem was not the support, but the bolt. There are 4 bolts for each side. Three are the same, one is different. See the photo. The bolts had been factory mounted in the wrong position, with the "short" bolt in the right place on one side of the bike, and in the wrong place on the other. Solution - remove the difficult to remove retaining clips, rearrange the bolts and everything mounted fine.
Third problem - the side cases sit on pins on the mounting rack and are pushed into the bike at the top so the locking mechanism snaps into place and locks. See instructions. However, the cutouts in the bottom of one back were not properly formed or located and the case would not side down far enough on the pins so it could lock into place on the rack. Solution - Dremel tool to slightly enlarge the cutouts.
Fourth problem - the heat shield that goes on the bottom of one case was not properly cut. Matching the cutouts to the openings for the mounting pins meant that the shield was not properly aligned with the bottom of the case. Not a major problem - just one more sign of sloppy manufacturing.
The cases themselves are great, and if it were not for these problems mounting them would be a breeze. Just expect to take a little (or a lot) more time than you were planning on. Only one quibble - the claim that they fit "one modular helmet" modular helmet is not true. They do not take my Shoei L Neotec. The opening and latching mechanism makes those helmets a little too big for the side case.
Another good point - Service from Fortnine throughout was great.
Date published: 2019-06-21
Rated 4 out of
5
by
Grant from
Helmet doesn't fit
Just bought these along with the frame / mounting hardware. Quick delivery by Fortnine.
Frame instructions were a bit like doing Ikea furniture, but everything fits solidly. Cases seem durable and secure. I'd give 5 stars but taking one away because they advertise as holding a full helmet. Not so much. My helmet is a medium and it won't fit. I had hoped to not have to use my top case but looks like it stays on. At around $1000 all in a bit pricey but this is a bike I intend to keep.
Date published: 2024-05-05
Rated 2 out of
5
by
Eaayrider from
Good looking product but givi lies about fitment
I purchased these v37 cases for my f900xr. Regardless of bike they claim to hold a full face helmet . Well my helmet does not fit , I don't have a massive noggin on me it's a normal Large to XL helmet and doesn't even come close . Very disappointed as this was the only reason I purchased these cases . Quality of product is good , but it is a lot to spend on brackets , mounts and panniers to find out it holds 37 liters of lies.
Date published: 2023-04-10
Rated 5 out of
5
by
westcoast rider from
Great investment
I haven't taken a trip with them yet and already they've made life so much easier! I commute on my bike a couple of days a week, and it's cold in the mornings. I can lock up my jacket, pants, and extra clothes for the day and know that they're secure. I can wear my lined leather jacket in the morning and my textile jacket in the afternoon and still have room to pick up some groceries on the way home! I love the security of being able to lock up my things and walk away.
Installation was a bit tricky, as my bike doesn't have the stock rear fender. Had to get a new license plate holder and rear signals. But I got it sorted!
Date published: 2022-05-29
Rated 5 out of
5
by
Caygeonklr from
Fast Delivery!!
I had been thinking about this gear for some time. When I finally pulled the trigger, I can't believe how fast it arrived. I have had Givi equipment for other bikes, and appreciate the quality. Completely satisfied.
Date published: 2021-08-16
Questions
Est-ce possible de les installer sur une Honda CTX 700?
Il faudrait confirmer avec Givi s'ils listent une ensemble de ontage compatible avec votre véhicle. Vous pouvez consulter leur site ici:
http://giviusa.com/
Date published: 2020-12-01
Ces valises viennent avec le support d installation? J ai un BMW R1200RS , qu elle serait le top case approprié pour aller avec ces valises ?
Non, le Givi V37 ne vient pas avec le support. Les séries compatibles sont de PLX ou PLXR
Date published: 2019-08-20