Kriega OS-Base for KTM 790/890 Adventure - KOSBA-B

Serious 'adventure' motorcycle travel demands serious adventure luggage and the Kriega OVERLANDER-SYSTEM (OS) sets a new standard. The OS-BASE is an innovative modular pannier system that fits virtually any trail, enduro or dual sport bike without the need for metal pannier frames. The OS-BASE is an 'over the seat harness' which allows OS-6, OS-12 or OS-18 ADVENTURE PACKS to be mounted as panniers. The modular design enables you to modify your luggage set-up to suit your ride - from a day's single track to longer adventure trips.

By adding an additional OS-ADVENTURE PACK as a top bag, you have a waterproof, highly durable carrying capacity of up to 54 litres. The flexible design of the OS-BASE also enables you to mount earlier model Overlander 15 packs as panniers, US-DRYPACKS as top bags and includes 'Loop Mounts' to attach a tent or sleeping mat.

No additional frames are required, this system provides a super-tough, lightweight carrying solution for the KTM 790 & 890 with no drilling or permanent bodywork alterations to the bike. The KTM RACK LOOPS included, attach to the bike's baggage carrier/rear rack and provide 4 optional hook-on points. Used in conjunction with the additional loops on the OS-BASE they provide various mounting points for a 3 or more bag set-up, or can be used to mount an OS-PACK as a stand alone tail pack without the OS-BASE. The set length straps make mounting a breeze and the purpose designed main body shape provides a tight, secure fit with plenty of distance from the exhaust. It takes less than a minute to mount the system to the bike and just seconds to remove it.

Features:

• Carrying capacity from 12 to 54 litres with centre pack mounting option
• Heavy-duty Hypalon™ construction
• Quick & easy to put on/take off
• Reinforced stitching on all stress points
• Aircraft grade alloy hooks
• Non-slip cam buckles

Included:

• 1 x OS-BASE over the seat harness
• 2 x OS-RACK LOOPS
• 2 x 790/890 Strap Mounts
• 4 x Alloy Spacers
• 1 x Fitting Kit

Fitting Instructions:

Once the OS-RACK LOOPS are mounted on the rear fender and the OS PACKS of your choice are mounted to the BASE, fitting is quick and easy.

• Pass the lower straps through the 790 Strap Mounts
• Loop the top straps around the baggage carrier Alloy Spacers
• Tighten the top straps and the OS-BASE is firmly mounted on the seat

Note: The rear foot peg mounts must be removed and replaced with the 790/890 Strap Mounts included. The OS-BASE 790/890 can not be mounted using the rear foot peg mounts, it will cause damage to the webbing.

Installation Instructions (3.80 MB)