Similar Products See other products of interest
Moose Complete Valve Shim Kit
$117.99 - $176.99
Moose Complete Valve Shim Kit Item # 449809
Description
- Complete valve shim kits make it easier to maintain your valve train
- Forged from 4140 cold rolled steel, not sintered
- Laser etched size on each shim for identification
- A great addition to any mechanics tool box
- 7.48mm diameter shim kits include 3 shims of each size from 1.20mm to 3.50mm in 0.05mm increments, fitting all Japanese 250Fs
- 8.90mm diameter shim kit include 3 shims of each size from 1.72mm to 2.60mm in 0.04mm increments, fitting newer KTM 250s and 450s
- 9.48mm diameter shim kits include 3 shims of each sizes from 1.20mm to 3.50mm in 0.05mm increments, fitting all Japanese 450Fs
- 10.00mm diameter shim kits include 3 shims of each size from 1.85mm to 3.25mm in 0.05mm increments
Part Numbers for Moose Complete Valve Shim Kit
Reviews
Rated 2 out of
5
by
bob o from
Don't rely on the size markings on the shims they can be off by as much as 3 hundreds of a mil. For something that needs to be so accurate and cost so much I will not get these again.
Date published: 2019-06-12
Rated 5 out of
5
by
Joe74 from
Ensemble complet , parfait pour vos entretients !
J'ai restorer le moteur de mon vieux RC51 . J'ai donc du roder les soupapes après avoir décarboniser les culasses. Le jeu des soupapes était alors à controller sur l'ensemble du moteur. Cet ensemble était alors un choix parfait.
Date published: 2019-04-21
Rated 3 out of
5
by
Jay86 from
Mesurez bien chaque shim avant de les utiliser!!!
Ne prenez pas l'épaisseur inscrite sur les shim pour de l'argent comptant. A titre indicatif je viens tout juste de mesuré les trois shim qui sont marqué 2.32 et j'ai obtenu les résultats suivant 2.29, 2.30 et 2.31. La différence était plus importante dans les shims que j'ai déjà utilisé. tous mesuré à 5 reprises et à trois endroits différent du shim. Cela ma toutefois permit d'avoir un meilleur ajustement qu'anticipé.
Date published: 2019-08-28
Rated 3 out of
5
by
Dennis from
Moose Racing Shims accuracy
I've used a few different sizes and find them to be fairly accurate but often 0.01 larger than stamped. I've also found the occasional one that is 0.02 larger than stamped. Just make sure you have a proper caliper to measure them before install.
Date published: 2019-07-15