Similar Products See other products of interest
Moose Pro Footpegs Item # 148062
Description
Features:
- Constructed from cast, heat-treated and hardened 17-4 stainless steel
- Width (57mm) and length (90mm); slightly convex platform for better boot positioning and grip when leaning forward or back
- Larger surface area with serrated teeth for positive gripping
- Made for the aggressive rider
- Available with 1/2in. rear offset to allow for more space
- Sold in pairs
- Use your OEM springs, unless otherwise noted in application chart
- Made in the USA
Part Numbers for Moose Pro Footpegs
Fitment for Parts Moose Pro Footpegs
This part fits the following vehicles:
Reviews
Rated 3 out of
5
by
EZ D from
Nice footpegs but...
Seem very strong, feel great on bike, though heavy. But...
if ordering for a WR250R - I ordered the 1/2" offset version of the pegs and it turns out they block the bolt that goes into the rear brake pedal, so when you take the pedal off to get the oem footpeg pin out and then back in again with the new footpeg in place, you will not be able to thread the brake pedal bolt back in - blocked by offset peg. So I had to put the brake pedal back on first and then install the footpeg with its pin facing upwards and the cotter pin at the top - not ideal, but is staying put so far.
Also, take note that you need to order new springs - looking back now i see it is mentioned during the ordering process but I missed it. So I ordered oem springs for a YZ250F and they work great, but they took forever to come.
And one other slight annoyance was that the hole thru the pegs had to be filed a little in order to get the pin to fit through. If you can put up with these things, and you don't mind the weight of hardened steel, then they are nice strong pegs. Unfortunately there is not much choice in aftermarket pegs for the WR-R.
Date published: 2016-02-07
Rated 4 out of
5
by
Flip from
Good Quality and ease of fitment.
I bought the Footpegs about a month ago. I just needed to upgrade the narrow footpegs that comes standard on the BMW Sertao 650.These specific footpegs are way more comfortable especially while standing during riding. You may need to adjust the gear shifter position since the footpegs are a little bit higher than the standard ones. This was really easy to fit onto the bike. It took maybe two minutes to do it.
Date published: 2022-11-15
Rated 5 out of
5
by
Plumbmad from
Very happy with them much improved over stock ones, went with the 1/2" offset, more comfy with the larger platform when standing.
Date published: 2022-04-12
Rated 5 out of
5
by
Ry45 from
Amazing pegs!
Used to ride stock footpegs and kept having my outside foot slide off in corners which was both dangerous for my ankles and doesn't allow you to hold your line well. Got these and i feel more planted than ever! The convex adds more grip when leaning forward and has a smoother feel than the flat pegs. Also the offset back adds just a little bit more room for us tall guys which definitely was a lot more comfortable.
Date published: 2017-09-18
Rated 5 out of
5
by
JeffK95Z from
Really enjoying the extra space!
have only been out a few times on these new pegs but already I can tell the difference in the increased space offered.
I haven't found the slight convex curve to bother me at all and I think once I get more riding time it'll be a nice benefit when leaning forward or backwards!
Great value in these pegs!
Date published: 2016-05-05
Rated 5 out of
5
by
turtlemoto from
solid pegs
Bought these and have been using them for a few weeks now I'm very happy with them. They feel solid and have much more surface area compared to stock
Date published: 2015-07-04
Questions
Does that come with the pins ? Or I need to use the oem pins on my bike ?
It doesn't come with pins. You can re-use the oem pins from the bike. I recommend you get new cutter pins to replace the old ones during the swap
Date published: 2023-11-14