Motion Pro Carburetor Adapter Set - 08-0013
$10.97
Motion Pro Carburetor Adapter Set - 08-0013 Item # 141160
Description
- Replacement carb adapter set for use with Motion Pro carb synchronization tools
- Includes 2 long 5mm tubes and 2 short 5mm tubes
- See 08-0040 for 6mm carb adapter set
- 5mm x P0.8mm
Part Numbers for Motion Pro Carburetor Adapter Set - 08-0013
Reviews
Rated 5 out of
5
by
CBXWpg from
easy access
I always procrastinated for buying these, but once I used them I laughed at myself for prolonging how difficult it was without them
Date published: 2021-07-02
Rated 3 out of
5
by
Colin from
Better than nothing but ..
The threads on the adapter are not machined to a close tolerance so when screwed into the head (Honda), there is movement even though the nut is tightened up. Part of the problem as I see it is the use of "o" rings vs a washer gasket which was used on a unit purchased many years ago. Application of a thread sealer can help. The idea of the "o" ring is a good one until the hoses are hooked up causing some side movement allowing leaks. Also, the outer diameter of the adapters is quite small and does not mate well with most hose used on syncro units other than the Motion Pro. Also, one of the long adapters broke at the threads after a minor side force was applied. Overall, poor quality. There are better products out there.
Date published: 2021-02-14
Rated 5 out of
5
by
guy61 from
Trés fonctionnels
Ca me dépanne parce que pas besoin d'acheter tout le kit au complet
Date published: 2019-04-20
Rated 5 out of
5
by
1973Kawa from
Great for maintenance
Eliminates gas tank on and off for repair. "But don't use the valve that comes with it." Brass plating comes off as small pieces that will plug carbs.
Had to clean my carbs after using first time. Used my own shutoff.
Date published: 2015-10-17