Motion Pro Carburetor Tool 90 Degree - 08-0229
$110.99
Motion Pro Carburetor Tool 90 Degree - 08-0229 Item # 141132
Description
- Precision made of aircraft grade aluminum & stainless steel
- Designed for hard-to-reach areas and air/fuel mixture screws on multi-cylinder motorcycles
- Gear driven 1/4 in. hex drive
- Includes five 1/4 in. hex drive bits (all 1/2 in. long) - Straight-slot, Phillips, D-shaped air/fuel mixture screw bit, 6mm hex jet bit & 1/4 in.-hex-to-1/4 in.-drive bit
- Can be used with any 1/4 in. or 6mm hex bits
- Strongest tool of its type on the market
- Max torque is 60 in. lbs.
- 17.5 in. long
- Replaceable drive gears
- Limited 1-year warranty
Part Numbers for Motion Pro Carburetor Tool 90 Degree - 08-0229
Reviews
Rated 3 out of
5
by
togo800 from
Bon outil mais...
J'ai acheter cette outil en me disant qu'il était chère mais qu'il doit être excellent?
Ce n'est pas un excellent outil mais un bon outil. L'engrenage du bout reste coincé assez facilement. J'aurais attendu qu'à ce prix, le mouvement serait monter sur bearing ce qui l'empêcherais de coinçé et le rendrais plus facile d'utilisation.
Je l'ai lubrifier ce qui l'as améliorer mais pas parfait.
J'aurais mis 5 étoiles si il ne coincerais pas.
Date published: 2020-10-08
Rated 2 out of
5
by
John M from
Would not recommend
Looked like a good design but quality of manufacturing was poor. Right out of the box the gears would bind. Tried lubricating but it didn't seem to help.
Date published: 2019-08-28
Rated 1 out of
5
by
Hitchslap from
Great idea poorly executed
The fitment of the driven gear in this tool is so poorly designed. The torque required to overcome the friction of the o rings on the mixture screws causes the driven gear to cock in its bore and bind the gears.
Date published: 2018-11-05
Rated 5 out of
5
by
Not applicable from
Probably best carb adjuster tool out there
Although this is an excellent tool , I did have issues, the 3rd time I went to use it , pulled out of holder tube and it just completely fell apart . The retainer used in the gear that holds shaft in had come out and I could not find it anywhere ? I just drilled out the gear hole and shaft hole and pressed a slightly larger roll pin in place , despite this issue it is still a great tool , it’s a must have in our busy shop
Date published: 2021-02-15
Rated 4 out of
5
by
togo800 from
Bonne outil mais...
L'outil est bien designer mais les engrenage de la tête sont difficile à tourné quelque des fois. Monter les engrenages de la tête sur des bearing ou des bonnes bushing serait une très bonne amélioration.
Date published: 2021-02-11
Rated 5 out of
5
by
Anonymous from
Wondefull
If you ever need to adjust the volume screw on an Ariel Sq.4 - THIS IS THE TOOL.
The click stops allow for incremental adjustment, it is rigid and can be held steady with ease. Thank you,.
Date published: 2019-08-28
Rated 4 out of
5
by
DanSherpa from
Fonctionne bien - works well
Fonctionne bien en autant que vous mettez un peu de PL100 sur le petit mécanisme au bout, sinon, ça bloque un peu. Très compact, peu atteindre n'importe quel vis.
Works well as long as you oil the 45 degree angle cog with something like PL100.
Date published: 2019-08-28
Rated 4 out of
5
by
mike from
as advertised
works well easy to set carbs now. no more paying a mechanic.
Date published: 2018-06-06