Motion Pro Clutch Holding Tool - 08-0008
$57.99
Motion Pro Clutch Holding Tool - 08-0008 Item # 141083

Description
Features:
- Made from medium carbon steel with hardened jaws
- Hold clutch hubs, flywheels, gears, sprockets, etc
- Features 8 mm spanner pins
- Jaws open up to 5 inches wide
- Reco mmended for square tooth style clutch hubs
- Not reco mmended for v-groove or half round style clutch hubs
- Will not work on clutch baskets with reversed inner clutch hubs where the integrated clutch faceplate is facing outward
- Replaces HD tool #HD-91042, Used on 1984 and later 1340cc models and 1984 and earlier XL models
Part Numbers for Motion Pro Clutch Holding Tool - 08-0008
Reviews
Rated 3 out of
5
by
Trevor from
Worked great but when I used the flywheel holding prongs they were to big so I had to grind them down
Date published: 2022-02-25
Rated 5 out of
5
by
Jordan7 from
Perfect!
Works exactly as it should. Good price abs good quality.
Date published: 2021-05-11
Rated 5 out of
5
by
bosco659 from
Worked well
Only used once on a Yamaha Dt175 and worked well. Had to open it quite wide for use and question whether it might work on a bike with a larger clutch basket.
Date published: 2021-03-23
Rated 4 out of
5
by
Exo41 from
Must have tool!
Makes torquing down fly wheels and clutches so much easier! One thing I will say tho is that they’re a little big for the clutch hub on my rm125 and left a little mark. (Nothing major, didn’t distort the metal at all)
Date published: 2021-02-13
Rated 5 out of
5
by
Colt from
Great tool!
Universal fit for all my bikes, vice grip locking and easy to use!
Date published: 2019-06-12
Rated 5 out of
5
by
Dirtstorm from
Works exactly as needed
Worked as needed, good quality does the job intended for
Date published: 2019-03-15
Rated 5 out of
5
by
jestr007 from
very good product ! nicely made and easy to use !
very good product ! nicely made and easy to use ....highly recommended
Date published: 2018-06-11
Rated 5 out of
5
by
Brian from
Works Perfect
Proper tools make all the difference! No damaged parts and no frustration.
Date published: 2018-02-13
Questions
Hello. It will work to assemble clutch in 1994 Kawasaki ninja zx7 ? Thank you.
I am not sure but it looks like it will fit any clutch basket
Date published: 2020-11-17
Hello, would this tool also work on a variator fan? for a burgman 400 ?
I don't see why it wouldn't. The only problem I see you having is holding the tool. Most of the other tools I looked at for your application are long enough to contact the ground. If you figure you can hold it or have someone hold the tool for you I believe it will work.
Date published: 2016-08-16