Motion Pro Micro Bleeder M4x0.7 WP 4860 MXMA Black - 11-0080
$19.76
Motion Pro Micro Bleeder M4x0.7 WP 4860 MXMA Black - 11-0080 Item # 188087
Description
Features:
- For 2007 or later SX/SXF/XC/XCF/XCW models with WP 4860 MXMA CC Closed Cartridge fork caps (P/N 4860.0516S1) as well as the WP 4CS fork. Also for use on all 1999 and later WP 43/WP 48 fork caps (P//N's 4860.0074S and 4860.0075S) with external spring preload adjustment. These fork caps require a 4-pin spanner (MP P/N 08-0290) to remove the fork cap.
- New ultra-compact, low profile design is only 11 mm high installed
- Stainless steel body is stronger and will not corrode
- Easy to install, simply replace the OEM bleeder screw with the Micro Bleeder
- Reduces harshness caused by air build-up
- Allows bleeding of air pressure without tools
- One of the easiest bolt-on upgrades you can make to your forks
- Kit includes two bleeder valves
Part Numbers for Motion Pro Micro Bleeder M4x0.7 WP 4860 MXMA Black - 11-0080
Reviews
Rated 5 out of
5
by
roost from
They work
They fit and bleed pressure from your forks. Couldn't ask for much more.
Date published: 2014-12-11
Rated 5 out of
5
by
Big kitty from
Better than using a screwdriver
Definitely better to push a button than having to loosen a screw to vent the forks
Date published: 2025-01-23
Rated 1 out of
5
by
Paul R from
Bleeders restrict spring preload adjustment
Although these bleeders are spec'd for my 2017 Husqvarna FE250, once installed, they restrict the use of the fork spring preload adjusters - you can't turn them, and they need to be positioned at the "0" setting on installation. As a result, I removed them from my bike - which is unfortunate!
Date published: 2020-03-26
Rated 3 out of
5
by
Steve from
Does the job
They do the job. I suspect the occasional leak on one side. Only using those for about 40 hrs.
Date published: 2017-06-24
Rated 5 out of
5
by
Castro from
Really great for keeping suspension optimal
I would always forget to relieve the pressure in my forks but now with these micro bleeders I always remember to after transporting and during breaks on the trail.
Date published: 2015-10-19
Questions
does this product fit a 2018 yz 250f
No. You need the KYB/Showa bleeder valves from Motion Pro. You need 5mm thread and the ones you asked about are 4mm thread.
Date published: 2019-10-01
Proper fit for 2022 Husqvarna TE 250i?
This will not fit your bike.
Date published: 2023-08-06
will these fit my 2020 husq tx300i?
No. My research shows that your bike has an
WP XACT air fork. You don’t need and CANNOT use an air bleeder valve. Bleed valves are used only on coil spring forks. Here’s a reference MXA review: https://bit.ly/3cC9jRT
Your fork’s firmness or softness is adjusted by varying the air pressure inside it.
Date published: 2022-04-20