Motion Pro Mini Chain Press Tool - 08-0070
$14.15
Motion Pro Mini Chain Press Tool - 08-0070 Item # 122142
Description
- Fits most 520 and 530 standard and O-ring chains
- Designed to press side plates onto the master link
- Hex key wrench is included with tool
- Perfect addition for tool packs
- Does not rivet together rivet type master links
Part Numbers for Motion Pro Mini Chain Press Tool - 08-0070
Reviews
Rated 5 out of
5
by
Enter nickname here from
Works great! Small enough for your bikes toolkit.
I replaced the chain & sprockets on my XR650L and the master link would NOT go on via the old vise-grip method. I didn't want to spend a lot of money on a tool I use about once every 5 years so bought this more for the price than anything else. The tool worked great, the only issue was that without a handle I had to use quite a bit hand-strength to get it to work, the larger (and much more expensive ones) come with handles - now I know why. Because there is no handle have a pair of disposable gloves on hand so you don't get chain grease all over yourself. In terms of value-for-money this tool worked fine, more expensive tools will work better but if replacing a chain is something you do rarely then this tool is all you need.
Date published: 2014-12-12
Rated 5 out of
5
by
samy from
Fonctionne bien et plus polyvalent que prévue
bon! comme vous savez, ce petit outil style (home made) sert principalement à presser la chaine. par contre, vous pouvez aussi pressé la maille pour sauver d'avantage d'argent au lieux de payer pour un n'autre outil. comment? la vis du centre possède un creux. trouver un petit bearing et couper le en deux pour aller chercher des ball bearing tremper pour aller placer entre la vis et la maille. ensuite, visé pour presser la maille. bingo! le système est simple et efficace pour les gens manuel! je conseil fortement par contre il pourrait ce vendre 7-8$ et les fabriquant ferait quand même 600% de profits
Date published: 2022-05-20
Rated 5 out of
5
by
eiwa from
Nice tool and useful !
Good quality. You really need this tool to attach the connecting clip link on an RK 525 GXW ultimate chain if you have no other appropriate tools.
Date published: 2021-05-21
Rated 5 out of
5
by
Mike from
Great tool
Getting a clip on over o-rings can be very difficult. This little press compressed the link and o-rings enough that I could easily slide the clip on
This is not a chain break or rivet tool, not sure why some people are trying to use it that way.
Date published: 2019-09-02
Rated 5 out of
5
by
Brentmanll from
Handy little tool...!!!
Better than trying to put chain together with a hammer. Much neater :)
Date published: 2018-11-05
Rated 5 out of
5
by
Rick from
works great
I cut my chain of with an angle grinder, an installed a new chain with this tool and a new chain-specific master link. It was easy to do when I held the tool in the jaws of a 12 inch cresent wrench while screwing it closed. This approach is much cheaper than a chain breaker/rivoting tool.
Date published: 2018-09-13
Rated 5 out of
5
by
larcher88 from
Great for the price
I was sceptical because of other reviews but nothing says it best than just simple trying it out yourself so I did, I think its amazing for what it does no elbow grease required and for the price it simply cannot be beat considering the fact it does exactly what $100 products do.
Date published: 2016-01-09
Questions
will this work on a 525 chain? It says it will work on most 520 and 530 chains, but I have a 525.
There shouldn't be an issue using this on a 525 chain.
Date published: 2022-02-13
Does this product break a chain as well?
No, it does not.
Date published: 2017-12-03
Will this tool work on a 428 chain? If not, is there an adaptor for a 428 chain?
As per the manufacturer, it fits most 520 and 530 standard and O-ring chains.
Date published: 2025-02-21