Muc-Off Punk Powder Bike Cleaner

Introducing the world's first plastic-free bike cleaner - Punk Powder. Made with 92% less packaging than using 2x 1L Nano Tech plastic bottles, with the same epic results!

Features:

• Makes 2x litres of bike cleaner
• 100% plastic free packaging
• Readily biodegradable ingredients
• 100% water free
• Refill your old bottle and help reduce plastic waste
• 92% saving in packaging compared to 2 x 1L bike cleaner
• 100% environmentally friendly ingredients, including plant based raw materials
• Supplied in a compostable sachet and printed with vegetable inks
• FSC recycled card box containing 2 x sachets – that makes 2L of bike cleaner
• Safe on all parts and surfaces including carbon fibre
• Will not harm seals, cables, disc brake pads or rotors
• Alkaline based and free from alcohol, CFCs, EDTA, solvents or acids
• Vegan & vegetarian friendly
• Cruelty free, not tested on animals

Sachet Directions for use:

1. Grab your empty old bottle of Muc-Off. (You may need a pair of adjustable pliers to remove the trigger from the bottle). Or purchase our Bottle for Life.
2. Fill up to the shoulders of the bottle with 1 litre of lukewarm water for faster formula activation!
3. Carefully cut one corner of the sachet open along the diagonal cut lines.
4. You can carefully pour the sachet straight into the top of the bottle. Or using the box, fold the inside of the lid together using the printed lines as a guide and use this as a funnel to pour the powder into your bottle. (Please see our video for full Directions for uses on this.
5. Screw your spray trigger back onto the top of the bottle. Ensure it's tight!
6. Shake the bottle vigorously for 30-60 seconds to activate the formula. If you notice any undissolved powder simply keep shakin' it!
7. Go clean that filthy bike!

Bike Cleaning Directions for use:

1. Rinse bike thoroughly before applying Bike Cleaner.
2. Spray Bike Cleaner onto the entire bike including components and leave for 3-5 minutes.
3. Agitate any stubborn grime with a brush or sponge.
4. Rinse entire bike thoroughly with fresh, clean water.

Tip: Don't forget to always protect components after washing with our MO-94, Bike Protect or HCB-1 and your frame and suspension using our Silicone Shine! This will help reduce dirt adhesion between washes and make maintenance easier.