Similar Products See other products of interest
Item #140666
National Cycle Touring Heavy Duty Windshield
$395.99 - $417.99
National Cycle Touring Heavy Duty Windshield Item # 140666
Description
Heavy Duty™ Windshields are fixed-mount windshields that use an allen key for removal. Only National Cycle Heavy Duty windshields can fit a long legacy of older motorcycles as well as the newest cruisers. A perennial best seller, the Touring Heavy Duty™ offers plenty of height and width for larger riders or those wanting maximum wind protection. The classic looks will enhance the front end of any bike. The width of the Touring Heavy Duty fits best on bikes with wider fork tube spacing, though the Mount Kit (sold separately) allows it to fit on narrow front ends as well. All Heavy Duty Windshields feature high quality chromed steel outer hardware and glare-free black inner hardware. Best of all, their sturdy 4.0mm thick polycarbonate has National Cycle's exclusive Quantum® hardcoating for the ultimate in scratch resistance. To top it off, they are backed by National Cycle's exclusive 3-Year Warranty against breakage.
Features:
- Tall screen with wide proportion
- Superior scratch-resistant, Lexan polycarbonate
- High-luster chrome outside strapping
Part Numbers for National Cycle Touring Heavy Duty Windshield
Fitment for Parts National Cycle Touring Heavy Duty Windshield
This part fits the following vehicles:
Videos
Videos
Reviews
Rated 4 out of
5
by
Ziggy from
Love the windshield I just wish I had the install kit that you can’t seem to supply
Date published: 2021-07-31
Rated 3 out of
5
by
AndyB from
Great windshield! Bolts are too short.
Now that I have the windshield mounted, it is great. However, the bolts that came with it were at least 0.5" too short. I had to go buy some bolts in order to finish mounting it.
Date published: 2017-09-19
Rated 5 out of
5
by
Wes W from
Sturdy.
Replaced an older style National Cycling windshield with this one. These fork mounts are much simpler to install and the windshield is solid. It doesn't move at all when riding where the older unit would shake and bounce at highway speeds. It's on a Yamaha V-star and in the tallest mount holes I don't get the wind buffeting on my helmet anymore either. My son has a V-star as well with the stock Silverado edition windshield and this one is comparable to it. I installed it myself but an extra set of hands would make it much easier as it is quite large.
Date published: 2022-09-01
Rated 5 out of
5
by
DIY Joe from
Great with some custom work to it.
Bought this for a Yamaha 650 Classic with the proper fitting JH brackets (fork to windshield) as suggested by National Cycle. With the driver in place the windshield would fit too high for her as you want to look over the shield and not through it. I drilled the brackets (forks to windshield) to lower the wind shield and was able to gain more adjustment with the groves provided in the windshield brackets as a plus. The proper adjustment wanted was making the windshield contact with the headlight and it looked weird to boot.
I then decided to cut the windshield for a custom fit. This was definitely a first for me and I was very nervous about cutting a new windshield but hey, if you want the best you often have to do it. So I looked at a few windshield cutting videos and set off to do it myself. I taped the windshield with masking tape after getting the desired curve traced (used an old motorcycle brake disk to determine the curve) on the windshield itself and not taping over it but just around it. I put a brand new blade with plenty of teeth and tried cutting where the scrap piece would end up after the final cutting to see if I had the correct settings and speed. Also I wanted to see how the shield would react to cutting like melting, chipping or cracking from the cutting process. Ended with the slowest speed on the jigsaw combined with a slow advance speed for perfect cuts. I then sanded down the cut area with 120 grit and finished with 240 grit.
I have to say that it looks as if the shield was custom factory cut as a final result. I also removed the sliding section of this windshield as it looked weird on this motorcycle and I figured that it would get dirty between this section the windshield which would make it hard to clean as disassembly would be required. Out it went!
Very good quality product and would buy again especialy that I can now custom fit for a great look.
Date published: 2022-06-22
Rated 1 out of
5
by
Ricker12 from
Does not fit
Says guaranteed to fit. Does not fit 2006 Honda VTX 1300c. It’s 2 inches wider then it should be. Had to shop it back and I still do not have a windshield. But as for as a quality piece it does look good.
Date published: 2022-04-04
Rated 5 out of
5
by
AtlinGlen from
Great Service
Great service with an easy to follow website. Items shipped quickly and were exactly what I was looking for.
Date published: 2021-06-12
Rated 5 out of
5
by
Red dog from
Beautiful windshield
This thing I put on the bike love the way it cuts the wind
Date published: 2018-07-19
Questions
Hello, What is the hight? Thank you
As this item is vehicle-specific, the specifications will be displayed once you select your vehicle.
Date published: 2015-08-28
Does the mounting hardware come with it?
No, you would need to order the bike specific mount kit: https://fortnine.ca/en/national-cycle-heavy-duty-mount-kit
Date published: 2020-11-18
does this windshield work with the switchblade quick disconnect mounting kit?
No, you need the heavy duty mount kit: https://fortnine.ca/en/national-cycle-heavy-duty-mount-kit
Date published: 2022-02-21