Ohlins RXF34 m.2 Air 29" Fork

Created for the high demands of fast downcountry riding, the RXF34 m.2 is the gold standard for short-travel trail forks.

Designed for riders who cover lots of ground — FAST. The new fork replaces the original RXF34, and offers a short-travel 120-130mm setup optimized for lightweight 29er trail bikes. Weighing in at just 1698g, the fork boasts a brand new air spring and damper adapted for the demands of the emerging riding style, while still carrying all the hallmarks of Öhlins' race-proven performance suspension seen from its long-travel, single-crown cousins — the RXF36 m.2 & RXF38 m.2.

OTX18 — the 'downcountry damper'

The RXF34 m.2 uses the newly designed OTX18 damper. Sprung out of the highly successful TTX18 found in the Ohlins downhill and trail forks, the OTX18 is purpose-built for lightweight trail bikes. It shares several key components with its bigger TTX18 brother, but weighs 27% less and is optimized for faster and more fluid trail riding, striking the optimal balance between traction, control, weight and stiffness. Like all Öhlins dampers, the OTX18 offers impressive adjustability for fine-tuning, with fifteen clicks of low-speed compression and rebound adjustment alongside three for tweaks to high-speed compression. As always, a large and extensively-tested setting bank is also available for those who wish to customize their ride feel even further.

Lightweight air spring

The new damper is paired with a robust yet lightweight air spring that features a positive and self-adjusting negative chamber. The positive chamber allows riders to tune the spring curve according to their needs using Ohlins' easy-to-use volume spacer system. The negative chamber, meanwhile, has been designed for fast trail riding and provides a plush initial feel and superb small bump sensitivity. The spring's surface and seals also minimize friction and breakaway force to enhance the fork's smooth ride feel.

Race-proven chassis design

With a flex pattern tailored for lightweight trail riding, the RXF34 m.2's super-stiff chassis delivers point-and-shoot precision steering. This has been achieved via a closed-end outer tube design to increase stiffness, impact resistance and the volume of the lower legs. Increased air volume at the bottom of the fork increases the impact of the air spring on overall performance. This in turn gives the rider more power to fine-tune performance to their liking for greater confidence and control. The RXF34 m.2 also benefits from the same race-proven floating axle design found in the RXF36 m.2 and RXF38 m.2, which decreases friction and further increases stiffness.

Features:

• OTX18 trail optimized damper
• 15 clicks of low-speed compression adjustment
• 15 clicks of rebound adjustment
• 3 clicks of high-speed compression adjustment, climb mode in 4th position
• 34 mm stanchions
• Offset: 44 mm
• Travel: 120 mm and 130 mm
• Floating axle design to decrease friction
• Weight: 1698 g without volume spacers
• Post mount 160 mm rotor size, max 203 mm
• Maximum tire size: 29x2.6
• Axle to crown: 541 mm @ 130 mm stroke
• eMTB approved

Specifications

• Wheel Size Compatibility: 29 in
• Axle: 110 mm
• Rake: 44 mm
• Fork Travel: 120 mm
• Fork Stanchion: 34 mm
• Suspension Spring Type: AIR
• Shock Stroke: 120 mm