Description
The 751.2 is a reamer for the HTR. It is sized to 30.1 mm. This allows a 0.1 mm interference fit when pressing the 30.2 mm headset of the "Euro" 1" standard. Note: The 751.2 is used on EC30 headtubes. If used on the EC29 headtube, it will ream it...
Park Tool 30.1 mm Reamer - 751.2 Item # 890120
Description
The 751.2 is a reamer for the HTR. It is sized to 30.1 mm. This allows a 0.1 mm interference fit when pressing the 30.2 mm headset of the "Euro" 1" standard.
Note: The 751.2 is used on EC30 headtubes. If used on the EC29 headtube, it will ream it up to the EC30. For sharpening services of cutting tools see Park Tool's Sharpening Services. Always use cutting fluid such as Park Tool CF-2 when machining.