Peaty's Cycling Rim Tubeless Tape

Peaty's Bicycle Rim Tubeless Tape

Features:

• Constructed from dual-layered, high tensile strength film. unique cold-foil silver logos are sandwiched between two layers of film for a long-lasting premium finish.
• Primed with a bespoke adhesive, the tape forms a strong air-tight seal with your rim, yet leaves little to no mess behind when removed!
• An optimum amount of stretch and a large, rigid recyclable core allows the tape to be pulled and applied with tension, contouring to your rim tightly for a better fit.
• Transparent design makes finding the valve hole easy.
• Cloth finishing strips included for a perfect seal (5 x per 9 m and 28 x per 50 m roll).

Application:

• Remove tire and any old rim tape - Use Disc brake cleaner to remove any grease.
• Clean and degrease rim thoroughly, ensuring rim is completely dry before application.
• Starting two spokes behind the valve hole, press tape firmly into the centre of the rim and smooth out to the edges, removing any trapped air.
• Run tape around the rim while keeping tape tension, finishing two spoke holes beyond the valve hole.
• Check for any trapped air underneath the rim tape - push air bubbles out to a spoke hole to remove.
• Cover the end of the tape with a strip of the finishing tape provided to prevent peel back.
• Use a small spike to pierce the tape in the centre of the valve hole.
• Remove dust cap, lock ring and o-ring then push valve stem through the valve hole.
• Re-apply the o-ring and apply lock ring tightly by hand, ensuring there are no air gaps.
• Refit tire, add peaty's tubeless sealant.
• Inflate tire to desired pressure.
• Ride!

One 9 m roll will cover approximately:

• 5 x 26" Rims
• 4 x 27.5" Rims
• 4 x 29" Rims
• 4 x 700c rims

One 50 m roll will cover approximately:

• 27 x 26" Rims
• 22 x 27.5" Rims
• 22 x 29" Rims
• 22 x 700c rims