Description
Features: Multi adjustable visor offers personalized windblast protection Clip-on system allows mounting without any drilling Mounts on shields between 3 and 5mm thick (0.12in. and 0.2in. thick)
Puig Clip-On Visor Item # 264614
Description
Features:
- Multi adjustable visor offers personalized windblast protection
- Clip-on system allows mounting without any drilling
- Mounts on shields between 3 and 5mm thick (0.12in. and 0.2in. thick)
Part Numbers for Puig Clip-On Visor
Videos
Videos
Reviews
Rated 5 out of
5
by
Jimbo from
Works great.
Super easy to adjust. Moves the air stream and diffuses it over my head now, instead of hitting the top of it. Much more comfortable when riding at higher spends ( +100km/h )
I now know what I need in my next windscreen
Date published: 2017-10-27
Rated 3 out of
5
by
Kevlar from
good product support form Canada's motorcycle puig
Works changes air management. Adds comfortable Pocket of air and delflects smaller bugs.
Date published: 2015-07-26
Rated 5 out of
5
by
Mudikon from
Just what I needed
At 6'2" on my R1200GS with Vstream tall windshield I had terrible buffeting and noise at highway speeds. The wind just caught the top of my helmet and the top of my visor. I added the clip on visor as an attempt before trying another windshield. This thing is great, eliminated all buffeting and noise, I can run at 110Km/h without earplugs for hours.
Date published: 2017-08-20
Rated 5 out of
5
by
Elt666 from
great product
Purchased at the start of a 7000km, 8 day trip for a Hayabusa with raised bars. Really reduced wind on the neck area with no noticeable handling impact, tested to 240kmh. Will purchase another for my wife's Triumph.
Date published: 2016-12-16
Rated 4 out of
5
by
Markdog from
Works Great
Over twice the cost it should be BUT worth it because it works so well. Cut noise and buffeting down 80%. I don't feel the need for ear plugs now but still wear them for longer high speed trips. The middle 25cm wide one just fastens on stock NC750x windscreen. Mounting width about 20cm same width as top of screen. Adjustable when weather gets warm and may want more wind blast. Solid and well made.
Date published: 2020-05-18
Rated 4 out of
5
by
John from
Puig clip on visor
I bought this to add on to a Slipstreamer Spitfire windshield that is attached to a Yamaha WR250. Without it, the wind off the windshield hits me mid visor and the wind roar is loud despite a quiet helmet (Shoei RF1200) and ear plugs. I noticed on my last camping trip that if I put the width of my hand on top of the windshield the roar went away. I decided to take a chance on the Puig despite that it cost way more than the windshield and I'm very pleased with the result. The wind blast now hits the top of my helmet as it should and as long as I keep my head centred, I'm sitting in a quiet pocket. I now can hear the engine clearly.
Date published: 2015-08-09
Rated 4 out of
5
by
Mike Sima from
Great shield as advertised
Great product, does the job and easy to set up. Glad I went for the larger size given I’m 6’4” and ride 2016 FJR 1300.
Date published: 2023-07-25
Rated 4 out of
5
by
jstgermain256 from
Works!
I purchased this to reduce the massive wind buffeting my windshield creates. I was developing tinnitus even with earplugs.
I picked the largest one, and it considerably reduces wind noise. I hear my engine at highway speed now and I can now have my visor open up to 90 km/h now.
It is not perfect though, as it shows when there are frontal winds. It slightly affects the stability with high winds. The provided screws did not fit; I had to enlarge the holes with a drill. It is quite expensive as well.
The look? Not super on my bike, but I don't really care.
Most importantly it does not hinder my view, it is sturdy and is quite a quality product. I am satisfied as I appreciate more the ride since my purchase.
Date published: 2022-11-08
Questions
Has anyone tried this on a stock 2011 ninja 650 screen?
We are unable to comment on the fitment on your specific bike, but the part is pretty universal, mounting on shields that are between 3 and 5mm thick (0.12in. and 0.2in. thick). As long as your shield is within those dimensions, you shouldn't have any issues installing this.
Date published: 2023-08-01
how wide apart are the mounting points on the Puig 315mm model
The mounting points on all of the Puig clip on visors are the same. The mounts are adjustable, and can be adjusted to fit windshields between 3 and 5mm thick (0.12in. and 0.2in. thick)
Date published: 2024-07-08
Has anyone installed this to a Yamaha V-Star Silverado 1100? If so how did it work?
We haven't mounted it to this specific vehicle, but it is a pretty universal fitting item. Mounts on shields between 3 and 5mm thick (0.12in. and 0.2in. thick). We would recommend checking out other customer reviews. The bikes ridden by these customers will be listed
Date published: 2025-01-12
Bonjour, Pour ajuster l'angle, faut-il dévisser ou simplement appuyer fermement, car les têtes de visse ce sont brisées ?
Ce ne sont pas des vis, mais des points de pivot. Le réglage s'effectue en manipulant les pièces et en les faisant passer par les détentes/cliquets, qui peuvent être assez rigides. Les pièces tournent de 180 degrés de haut en bas sur les deux pivots. Ajustez la position de la visière en premier et ensuite, installez-la sur la moto.
Date published: 2021-12-17
Are the clamps that attaches to the windshield rubber mounted? In the video it looks like metal crews are contacting the actual windshield. I'm I seeing that right? I need one of these deflectors but I don't want to damage my windshield in any way.
No worries. There are 2 clear pads on each side of the clamps that grip the windshield. Windshield will remain unscarred. Cheers
Date published: 2019-07-03
does this fit on an Bmw F800st & are their more than one size , colours ?
This is a universal item that mounts on shields between 3 and 5mm thick (0.12in. and 0.2in. thick). It's available in clear or smoke, and in 3 different widths - 230 mm, 277 mm, and 325mm.
Date published: 2025-11-27
I have the Puig touring screen on my 2016 BMW R1200 RS, and am interested in adding this visor. I’m wondering if it will fit on my screen, as the top of my screen is a V-shape (not sure how to add a picture, but it’s the “Touring Screen” on the Puig site)
Yes, this visor will fit on your Puig Touring Screen. You just need to be sure to order the appropriate width. It should mount to the designated points highlighted in this photo: http://imglin.com/hQE9YFphq8.png
Date published: 2024-07-03
Hi, how do you adjust the angle/height?
It’s on 2 double-hinged arms, you just pull/push for height, twist for angle.
Date published: 2020-11-17