RAM Mounts Fork Stem Base - RAM-B-342 Item # 252790
Description
The RAM-B-342 is a Base. You may need to purchase other components to complete your setup
4 Steps to Configure your Mount
The RAM® motorcycle fork stem base is one of the cleanest and most popular solutions for mounting your favorite device on the center of your bike. Featuring a B size 1" rubber ball, this part is designed to fit into the cylindrical bore wall of fork stems and will work with stems that measure 12 mm to 38 mm (.5" to 1.49") in diameter.
Features:
- Designed to fit into the cylindrical bore wall of fork stems
- Included B size 1" RAM® rubber ball allows for connection to any B size RAM® double socket arm; ball and socket technology allows for near-infinite adjustability
- Made of powder-coated, marine-grade aluminum for durability and reliability in the most demanding environments
- Backed by a lifetime warranty
Hardware Included:
- (1) Expansion Plug for 12 mm - 38 mm (.5" - 1.49") Fork Stem Holes
- (1) M5 x 60 mm Machine Screw
- (1) Steel Washer Set
- (1) Nut Pocket Washer Set
- (1) Brass Nylock Nut
Ball/Socket Size:
- B Size (1")
Weight Capacity:
- Standard Use: 2 lbs
- Heavy-Duty Use: 1 lb
Materials:
- Marine-grade aluminum
Part Numbers for RAM Mounts Fork Stem Base - RAM-B-342
Videos
Videos
Reviews
Rated 2 out of
5
by
Nickg from
Not great
The mounting system doesn't work very well the rubber was too hard a compound and wouldn't expanded as designed ended up stripping the bolt that was ment to tighten it down. some minor tweeking I was able to get it to work but it's still loose and can spin in the fork stem
Date published: 2015-08-08
Rated 1 out of
5
by
NMc269 from
Don't waste your time and money
Instructions are easy enough to follow but it would not tighten up enough that the ball mount would not rotate when riding. Not a great design...should have went with my original idea for a tank mount bracket instead.
Date published: 2021-07-07
Rated 5 out of
5
by
Ugaud74 from
Comme d’habitude service tres rapide. Installation sur un ninja 1000 facile mais demande plus d’ajustement car c’est un teou octogone. Somme tout tiens tres biens.
Date published: 2021-05-12
Rated 1 out of
5
by
Munster from
Does not work
Does not work with my cbr650r. The.diameter is 20mm, but too large for fitment. If you have really small diameter, you can try this. Otherwise, avoid it.
Date published: 2020-07-10
Rated 1 out of
5
by
r111 from
Doesn't live up to the claims it makes
Followed manufacturer's instructions in great detail, including the written and their youtube video. The rubber didn't become snug enough in the stem, as per instructions, I tried to loosen it to pull it out, but the bolt came out and fell through the bottom of the triple tree. Ended up with the rubber stuck in the stem. Fast forward an hour, was able to get it out but with lots of damage. So I either threw all my money out or I have to buy another stem base.
Once you get it working it's good, but be prepared to spend more than expected.
Date published: 2019-04-13
Rated 2 out of
5
by
tempest20 from
Mount rotates - then busted plastic
Install went okay, but the rubber barely even fits the eight gen VFR 800 fork stem. The mount would rotates while riding like crazy - couldn't get the ball to stay in one position. Tried to tighten it up - nut busted the plastic and then got stuck on the bolt. Trying to find the extra plastic pieces that I had left over to see if I can replace it...
Date published: 2018-08-10
Rated 5 out of
5
by
turboy from
Excellent purchase !
I'm very satisfied with this purchase and i recommand very hight !
Date published: 2018-06-14
Rated 5 out of
5
by
George from
Great product but I can’t use it with my bike
Sturdy installation (prior to reinstalling my handlebars), but its location on my bike appears to prevent the handlebars from being fully secured back down into their clamps. As a result, I instead had to purchase the RAM Mounts Handlebar Bolt Ball with Hole Base so I could use my GoPro.
Date published: 2018-05-09
Questions
Will this fit in a 2013 Ninja 1000? (centre fork is a hexagon shape)
No specific fitment information for this part. This part is designed to fit into the cylindrical bore wall of fork stems and will work with stems that measure from 12 -20mm and 28mm or 0.5” – 1.10” at the following intervals:
Metric Standard
12mm 0.5”
14mm 0.55”
16mm 0.63”
18mm 0.71”
20mm 0.79”
28mm 1.10”
Date published: 2020-11-06
Would this fit on a 2015 Suzuki gsxr 750?
If the hole between your handlebar look like something like this : http://44teeth.com/wp-content/uploads/2015/08/750_head.jpg
Yes it will fit.
Date published: 2016-12-01