Renthal Standard 7/8" Handlebar
$119.99 - $191.99
Renthal Standard 7/8" Handlebar Item # 120269
Description
Renthal 7/8" handlebars re-wrote history when they became the first aftermarket aluminum handlebar to be fitted as OEM on a Japanese motorcycle.
The exclusive aluminum alloy and the advanced manufacturing processes they use result in a handlebar which is more than capable of withstanding the extreme rigors of motocross and supercross riding and racing.
Features:
- 7/8" (22 mm) external diameter to fit most standard sized clamps and controls
- 7010 T6 aluminum which Renthal has exclusive rights to this specially developed alloy for the manufacture of handlebars
- High impact strength, lightweight and excellent vibration dampening
- Shot peened surface finish to help prevent fatigue failure
- Knurling: Grip end only, increases bonding between bar and grip
- No knurling in clamp area, this could cause a stress riser and lead to fatigue failure
- Anodizing: 15 step anodizing process forms an integral coating giving protection against corrosion
- Renthal's copyrighted, bonded lightweight single bolt clamping system for the cross-brace , greatly increases strength whilst still allowing flex
- Laser etched positioning grid
- The highest quality: 35 individual steps/processes required in the production of each bar and 58 separate quality checks made
- A specially developed injection molded crossbar pad is included with every handlebar
Part Numbers for Renthal Standard 7/8" Handlebar
Videos
Videos
Reviews
Rated 5 out of
5
by
Plisskin from
Good bars
I’ve had these on several bikes and they always preformed well
Date published: 2019-11-23
Rated 4 out of
5
by
Marc from
Perfect Replacement bar for Honda CRF250l Rally
The Renthal enduro 7/8 rc bar is a perfect match to the stock bars from control, rise, sweep, clamp area, height and width. Barkbusters fit perfectly on the bar.
Date published: 2018-11-06
Rated 5 out of
5
by
Zerzil from
Renthal Standard 7/8" Handlebar
After a friend noticing and mentioning to me that my stock handlebars on my 2011 KLR650 were bent, I couldn't unsee it. It drove me absolutely insane. So, after a few long, grueling days I decided to order new ones. Shopped and shopped and read, and read. Lost in everything that was handlebars I decided to get these Renthals. (the Standard 7/8" handlebar). While they were significantly shorter (height) than stock (I ended up also buying a set of the Rox adjustable risers to go with the bars) they feel excellent. They feel like quality. No vibration that I can notice (but hey, take that with a grain of salt because someone had to point out to me that my bars were bent, right? I know you were thinking it). Ordered a set of the ProGrip grips to go with these as well. Altogether, it feels like a brand new bike. (at least everything hangy-onto is new) Bars - good and sturdy, good sweep, good width, good height. Easy to affix the DFlex handguards I have onto these as well. I'd recommend these to anyone, but depending on your ride, you may want risers as well. (I've got moderate baboon arms, so the height post-risers wasn't an issue - even though they were adjustable).
Date published: 2018-08-29
Rated 5 out of
5
by
Marcus17 from
Good sturdy bar, has taken a few good drops
Good strong bars, good height and angle for me at 5’11
Date published: 2021-10-31
Rated 5 out of
5
by
T pav from
Worth buying
Got them for my 2015 ttr 230 because stock bars were broken best best bend for trail bikes is RC bend,and like longer bars and they feel better over great bars
Date published: 2023-02-06
Rated 5 out of
5
by
Jess from
They bars are simply awesome.. very simple to install too.. just great
Date published: 2018-07-11
Rated 5 out of
5
by
james from
great size and fit.
stock bars on my little 250 dual sport were terrible. too much sweep for trail riding. the RC high is much better, and the added rise helps when you are a taller rider as well. perfect fit and sizing for me.
Date published: 2014-12-10
Rated 5 out of
5
by
Burgess from
Renthal is king
Perfect sise for wide shouldered tall guys on a pit bike.. im super tall 6'5" so i have rox 2inch risers also but they fit my yamaha ttr110 perfect
Date published: 2024-12-10
Questions
Hi would this fit on Yamaha 2015 bolt c spec? Do I need to change the cables too? Thanks
Assuming the SE bars won’t interfere with anything up top on the bolt, You’d have to verify that the current bars and mounts are 7/8”. If not you’d have two options. Go with 1” bars or change the mounts. Although not to common go go down a size on the mounts. Cable length could be a problem and you may have to reroute or replace if to short. If they are to long use cable ties to keep them out of the way.
Date published: 2020-10-01
Do the handle bars come with the pad displayed in the picture?
Yes, the pad is included with the handlebars.
Date published: 2023-07-31
What’s the difference between RC and windjammer options for the blue handle bars?
You can see the different specs of all the Renthal handlebars here : https://www.renthal.com/worksfit/
Date published: 2019-01-11
are the red ones the dark red color or brighter then shown in the image
The shade of red that you can see on the ends of the Silver/Red bars is brighter than the shade of the Red only bars.
Date published: 2020-11-19
What bars would I get for 2020 crf 125fb?
It depends on what you are trying to accomplish. Lighten it up, raise, lower, change the sweep etc. It looks like the rise is pretty massive on the stock bars, so if your looking for same fit, form and function with aftermarket, you'll need bar risers for sure. I'd suggest playing with the angle of the stock bars and set them up for your riding style, save your money for when you move into a full sized bike.
Date published: 2021-01-08
I'm looking for the 971-08 Ricky Carmichael bar in red for my 2014 Suzuki DR 650SE. could someone check the I.D of the bars so I can use a bar end mirror that inserts into the bar? Thanks.
The ID of the bar is about 13mm / 0.5inches.
Date published: 2024-03-28
I am having troubles determining if these will fit my Kawasaki KX250F 2017. Will these work for that bike. I believe the OEM number is 971-08 Renthal. Can't seem to find manufator part number. Thanks,
Most, if not all 7/8” bars should fit your KX including these.
Date published: 2024-03-23
Would these fit a 2020 Honda CRf250F? Just wasn’t sure and I would like to order these.
If your stock handle bar tube is 7/8" then yes it would be a straight bolt on. If your stock bars are 1 1/8" then you'll need new mounts.
Date published: 2020-12-05