Rox Speed FX
Rox Speed FX 1.25" Block Offset Risers for 7/8" and 1 1/8" Handlebars
Item: #675592 | Part Number: Not Selected$137.99
Description
Features: Moves the handlebar 1" up and 1" back in the rearward position, or 1 1/4" straight up in the forward position (can be installed in either direction depending on the desired height adjustment) These risers have an oblong hole in the body of the risers which allows them to...
Rox Speed FX 1.25" Block Offset Risers for 7/8" and 1 1/8" Handlebars Item # 675592
Description
Features:
- Moves the handlebar 1" up and 1" back in the rearward position, or 1 1/4" straight up in the forward position (can be installed in either direction depending on the desired height adjustment)
- These risers have an oblong hole in the body of the risers which allows them to fit nearly any bolt center-to-center distance (see additional pictures for more info)
- Reducers lock into risers to ensure no slippage between components
- Rox Pro-Offset risers have an oblong hole so that they will fit virtually any fore and aft bolt center-to-center distance with 8mm bolt threads
- Accepts 7/8" (22mm) OR 1 1/8" (28mm) handlebars
- Lifetime manufacturer warranty
- Made in the USA
Note: It is important to verify that you have adequate brake line/cable length and stem clamp clearance before installing risers as longer cables may be required on some models. Please also note that these will not fit Polaris quads without modifiying the OEM stem.
Part Numbers for Rox Speed FX 1.25" Block Offset Risers for 7/8" and 1 1/8" Handlebars
Videos
Videos
Reviews
Rated 5 out of
5
by
CM13 from
Rox risers…
Perfect for getting the DR650 to fit me much more comfortably both sitting and standing. Quality product easy to install.
Date published: 2024-11-06
Rated 5 out of
5
by
pilmat from
Simple and Effective
The CRF300L Rally feels a bit cramped for my 6 feet and 32" inseam. These get the bars up a bit and forward transforming the cockpit. I now feel more on top of the bike and can ride easily standing where it was too hunched over before.
Easy install. With stock bars the wires and cables are all good too, no binding at either steering extreme.
Date published: 2023-07-30
Rated 4 out of
5
by
Ray G from
Rox risers on a vstrom
Works as described on a 2022 vstrom 650. This is about the limit without doing work on the cables. I just wish they filled in the lower holes for smoother looks
Date published: 2023-05-16
Rated 5 out of
5
by
AT18 from
Good
Installed on base model 2018 Africa Twin, better riding position standing up.
Date published: 2022-11-10
Rated 5 out of
5
by
Brentmanll from
Perfect fit for my 1997 Triumph Tiger
It raised my handle bars almost 2"...which made my ride for long distance more comfortable.
Date published: 2021-08-19
Rated 5 out of
5
by
llavalle from
Fits great on NC750x - no cables required
Bought this for my 2014 Honda NC750XA (with ABS)
Installation was super quick - didn't require me changing any cable / hose. The tightest one was the front brake (because it goes to the ABS module) but by simply moving the grommet down on the hose made it work.
These blocks + rotating the handlebar a bit made it so I can be completely straight on the bike - alleviating neck issues !
Date published: 2021-05-28
Rated 5 out of
5
by
BertF from
Excellent product.
I installed this riser on a 2012 Kawasaki Versys 1000, and the install was very easy. Did not have to lengthen cables or brake hose.
It makes my riding position more comfortable.
Date published: 2021-03-28
Rated 5 out of
5
by
Markymarkjay from
Work and fit as expected on my Trimph S3
Got these for my 2019 Triumph Speed Triple RS to give me a bit more of an upright position as my arms and torso are not that long. I actually needed more back than rise, but the bar switchgear would've hit the tank so these 1" up -- 1" back risers allowed me the shorter reach I needed without the tank interference. I did have to remove the stock S3 branded top clamp and use the clamps from this kit, but it still looks great and holds solid. Installed in about 15 minutes, and I'm clumsy.
Date published: 2019-06-14
Questions
Will this fit a 2024 FE501S
Will this fit 2018 Suzuki V-Strom 650xt
Would this work for a Honda 2022 Crf 300L. I need to raise the bar 1in minimum and move forward as well. I’ve gone from 7/8 to a 1 1/8 fat bar
Rox Speed does not confirm compatibility of this specific item with your bike, so we would suggest contacting Rox Speed directly to confirm fitment: https://roxspeedfx.com/pages/contact-us
Date published: 2023-10-25