S&S Cycle
S&S Cycle Easy Start Gear Drive Camshaft Kit
Item: #280100 | Part Number: Not Selected62% off
$326.99 - $1,729.99
$326.99 - $1,729.99
Description
Features: S&S .551" lift cam is designed for engines with 96 to 106 CID and 9:1 to 10:1 compression this is a bolt-in cam set designed for stock or mildly modified touring bikes. Greatly improves low-end and midrange torque, strongest from idle - 4000 rpm This 551GE gear drive easy...
S&S Cycle Easy Start Gear Drive Camshaft Kit Item # 280100
Description
Features:
- S&S .551" lift cam is designed for engines with 96 to 106 CID and 9:1 to 10:1 compression this is a bolt-in cam set designed for stock or mildly modified touring bikes. Greatly improves low-end and midrange torque, strongest from idle - 4000 rpm
- This 551GE gear drive easy start cam is designed to greatly improve valve timing accuracy by eliminating timing chain lash and Easy Start Cams allow stock starter to start any engine
- Complete kit includes cams with inner gears and installation kit
- Intake Opening (degrees): 17
- Intake Closing (degrees): 19
- Exhaust Opening (degrees): 41
- Exhaust Closing (degrees): 17
- Intake Duration (degrees): 215
- Exhaust Duration (degrees): 237
- Intake Lift (in): .550
- Exhaust Lift (in): .550
- Intake Lift at TDC (in): .178
- Exhaust Lift at TDC (in): .170
Part Numbers for S&S Cycle Easy Start Gear Drive Camshaft Kit
Fitment for Parts S&S Cycle Easy Start Gear Drive Camshaft Kit
This part fits the following vehicles:
Reviews
Rated 5 out of
5
by
2000 ultra from
The 551 Gear to Gear Cam was an easy install. The cam performs just as described and has Great power from idle to 4,000 RPM (Bike now redlines at 4,000 RPM). If you take it easy and don't rev the engine over 4,000 RPM this is the cam for you. I installed this into my customers Electraglide that was a 96 CI bored out to a 103 with a Baker DD7 (seven speed) transmission. The customer is extremely happy and wouldn't
Date published: 2015-06-03
Questions
Do i need the standard cam or easy start cam for a stock bike? S&S said "If you have stock compression stick with the standard cam. If you are over 10:1 compression go with the easy start. Yes, purchase the complete kit." but I only see one option at FN
You don't need the easy start cams on stock compression bike. I don't even put them in when I increase the compression to 9.5:1. You can install them if you want to but it is not necessary.
Brian
Date published: 2021-03-01