Description
The RF-1200's CWR-1 shield provides a vast field of vision that rivals helmet less peripheral. In addition to protecting against 99% of the sun's damaging UV rays, the CWR-1 shield offers a distortion-free view throughout the entire range thanks to SHOEI's 3D injection-molding process. Additionally, innovative new ribs on the...
Shoei CWR-1 Pinlock Shield Item # 179399
Description
The RF-1200's CWR-1 shield provides a vast field of vision that rivals helmet less peripheral. In addition to protecting against 99% of the sun's damaging UV rays, the CWR-1 shield offers a distortion-free view throughout the entire range thanks to SHOEI's 3D injection-molding process. Additionally, innovative new ribs on the top and bottom edge of the shield improve rigidity and eliminate the bending that may occur from wind pressure and during the opening and closing process, and an improved shield locking mechanism rounds out SHOEI's most advanced shield system to date.
- Distortion-free view throughout the entire range.
- 99% UV protection.
- Pinlock® ready.
- Innovative new ribs on the top and bottom edge of the shield to improve rigidity and eliminate bending from wind pressure and during the opening and closing process.
- Features SHOEI's most advanced shield locking mechanism.
- The all-new QR-E base plate system facilitates quicker shield changes than ever before; once a shield is installed, the strengthened spring-loaded base plates pull the shield back against the dual-lip, dual-layered window beading to ensure a wind and waterproof seal with each and every closure.
- The Pinlock® Anti-fog Lens transforms your single shield into a dual shield that will resist any amount of fog buildup.
- For use with Pinlock® inserts (sold separately).
Compatible with Shoei helmets:
- RF-1200
- RF-SR
- X-14
Part Numbers for Shoei CWR-1 Pinlock Shield
Reviews
Rated 4 out of
5
by
Drew39 from
Spectra Gold = Lovely
The product is exactly as described. The Spectra Gold looks amazing and will be a perfect accessory addition to your Shoei helmet. I feel like a Power Ranger on the road with this bad boy. When looking through the Sheild, it gives off a blueish tint that isn't quite as dark as the dark smoke shield. That said, I quite enjoy it as it lightens up my surroundings and works well on overcast days. A good comparison is like wearing a blue tint google lens for skiing/snowboarding.
One issue I have with the Shoei CWR-1 Pinlock visors in general is how easily they fog up... forcing you to buy the EVO Pinlock insert... which states it should only be used with a clear visor!? --- so why make these versions? Either way, only downfall, I sometimes need added airflow or slightly crack my visor when needed.
Date published: 2017-05-15
Rated 5 out of
5
by
Canned yams from
Goldilocks Zone
The 'Mellow Smoke' shield, for me, is in the Goldilocks zone. Not too dark, not too clear...it's just right. If you're looking for anonymity you'll want the darker shield as Mellow Smoke does not hide your face.
Am able to ride through tunnels without lifting visor, like a clear visor.
Date published: 2019-11-18
Rated 5 out of
5
by
1down5up from
Does what it says on the tin!
I bought a Shoei RF-SR and wanted a dark smoke shield, this does the job intended. Only disappointment realistically is that i wish Shoei would have included a little bag/cover/sock to store the visor in (so that i can throw it in the bag without worrying and change out when it gets dark, and my main disappointment unrealistically, is that I wish it would have come with a pinlock insert (but that obviously was not going to happen)
Date published: 2019-06-12
Rated 5 out of
5
by
Billy Bee from
Amazing colours
I purchased the spectra fire shield to replace the dark smoke one i had before. Comparing the two, the dark smoke is a darker tint, while the spectra fire seems to be based on a light smoke base. Both work well in the bright sun. I was initially skeptical of buying any of the cwr-1 spectra shields because they looked very see-through / transparent, and out of the box they do. Once its on the helmet it seems to be almost a solid mirror finish and its only up close you can barely make out any facial details. In one of my photos I have two fingers up, and its very hard to make out they're in the helmet.
This visor is expensive, but definitely worth it. The colours are amazing, stock photos don't do justice for the blue and purple on the very sides of it.
Date published: 2019-03-25
Rated 5 out of
5
by
Julie from
La teinte n'est pas trop foncé ni trop clair. Tout simplement parfait!
Date published: 2015-10-17
Rated 5 out of
5
by
Jahana from
Good visor
Easy to swap in and out, perfect fit. Bugs come off with warm water, protects my eyes from the sun. What else do you need?
Date published: 2015-08-08
Rated 5 out of
5
by
Donnie from
Shoei Tinted Visors
Awesome shield and fits perfectly. Very fast delivery.Thanks
Date published: 2025-06-02
Rated 5 out of
5
by
ReaperZ650 from
Great Shield!
I really like this shield. It looks awesome on my Shoei RF1200. I really dont like wearing sunglasses and this eliminates the glare nicely. The pinlock that comes with it works well. Definitely not a shield to be worn if you plan on riding at night.
Date published: 2018-09-10
Questions
Does the visor come with a pinlock insert? Or do you need to purchase separately. Thanks!
Sold separately here: https://fortnine.ca/en/shoei-cwr-1-cns-1-cw-1-pinlock-insert
Date published: 2020-12-24
Looking for a replacement visor for Shoei RF1100 any help would be appreciated
You need the CW-1 shield for the RF-1100: https://fortnine.ca/en/shoei-cw-1-shield-for-x-12-and-rf-1100
Date published: 2022-02-21
Would this shield fit my Shoei rf 1200 if not could someone point me in the right direction ? Thank you !
Yes, this is a good fit for your helmet.
Date published: 2020-03-25
Is the spectra blue still pinlock ready?
Yes, all colors of the shield listed under item #179399 are pinlock ready.
Date published: 2020-02-18
Est-ce que ce modèle convient au GT-air Daunless
La bonne visière pour le GT-Air Dauntless se trouve ici: https://fortnine.ca/en/shoei-cns-1-shield-for-neotec-and-gt-air
Date published: 2018-06-12
Does this shield fit the Shoei Neotec 2
No, you would need the Shoei CNS-3 shield for a Neotec 2. Item #617741
Date published: 2020-12-24
Will this visor fit a shoei RF 900 helmet?
No, the RF-900 requires the Shoei CX-1 Face Shield
Date published: 2019-10-07
Shoei CWR-1 Pinlock Shield (#179399) Will this fit a GT-Air Shoel
No, as per the product details CWR-1 is compatible with these helmets:
RF-1200
RF-SR
X-14
You need the CNS-1 shield for GT Air models: https://fortnine.ca/en/shoei-cns-1-shield-for-neotec-and-gt-air
Date published: 2020-11-09