SuperATV Atlas Pro Offset A-Arms - Keller Performance Ball Joints - AA-CA-DEFXMR-001-BK-02

Colossal A-Arms for Your Defender

Your Defender is one heck of a machine, but is it prepared for battle against the roughest terrain? Upgrade your suspension by adding SuperATV's Can-Am Defender HD10 Atlas Pro 2" Forward Offset A-Arms to your side-by-side. Atlas Pro tubing is bigger and stronger. At 1.5" in diameter, it's 0.5" larger than your OEM A-arms. And the offset makes room for 32" tires.

Massive Tubing and Hefty Parts = Atlas Pro A-Arms

SuperATV never takes a back seat when it comes to A-arms. Take your OEM A-arms and make them 50% bigger, and you get SuperATV's Defender Turbo Atlas Pro A-Arms. The tubing is 1.5" in diameter and 0.5" larger than your stock A-arms, giving you massive A-arms that are incredibly strong. And for added durability, they're powder coated them to fight off rust and corrosion.

2" Offset for Added Stability

These high-clearance bends give you 2" of ground clearance so you won't bang into every rock or branch, making your ride smoother. And thanks to SuperATV's 2" forward offset, your wheelbase is larger, increasing your stability and allowing you to run up to 32" tires. And the best part (besides the strength), is you get all of this without having to add a lift kit to your machine.

Adjustable Pivot Blocks

Do you want to add a lift kit or larger tires? Make sure you change your camber so that you don't experience premature tire wear. Or do you want to leave your machine like it is? SuperATV adjusted the pivot blocks to match your machine's specifications for you, so you don't have to mess with it if you don't want to.

Keller Ball Joints:

Keller Ball Joints use a two-piece design that eliminates the need for a snap ring. They thread onto your A-arms like a nut and bolt, which makes these ball joints virtually impossible to pull out. The high-quality chromoly steel stud combined with an advanced tool-steel body makes them perfect for bigger machines, bigger tires, and bigger rides. And since they're greaseable and rebuildable, you can keep them running perfectly.

Features:

• Made with 1.5" x .138" wall steel DOM tubing
• Fit up to 32" tires
• Made with 2" diameter tubing
• 0.5" larger than stock
• 0.25" larger than SuperATV's standard High-Clearance 2" Forward Offset A-Arms
• Adjustable pivot blocks for full camber adjustability
• Utilizes stock A-arm bushings
• UV-resistant powder coat finish
• Easy to install

Fitments:

• Can-Am Defender HD 10 XMR : 2018+
• Can-Am Defender MAX HD 10 XMR : 2019+