SuperATV Honda Talon 1000R RackBoss 2.0 Rack and Pinion

RackBoss 2.0 Is the Best Rack We've Ever Made

The more you beat on your Talon, the less responsive your steering gets. It happens to every rack eventually. But not anymore. Upgrade to SuperATV's Honda Talon 1000R RackBoss 2.0 Rack and Pinion. It's an upgraded version of the original RackBoss that uses X24 Tech—a unique dual-bushing design that reduces wear by over 50%. It's built for the big tires and wicked terrain that would sideline most rigs.

Boosted Durability with a Dual-Bushing Design

RackBoss 2.0 removes almost all unwanted internal play by using the X24 dual bushing design. With heavy-duty PTFE bushings positioned at both ends of the rack, the rack gear and tension spring are nearly motionless. Without extra play, you can ride harder with bigger, heavier upgrades and still see less wear than a stock Honda 1000R steering rack. That durability is boosted even more with the inclusion of a grease zerk that makes it easy to keep it running smooth.

Swaged Tube Tie Rods

The steel swaged tube tie rods give you exceptional strength in a lightweight package. The flared-out design makes the 7/8" diameter tubing even more durable. Plus the tie rod ends are made stronger to eliminate stock's biggest weak spot. With massive 16 mm rack threads and 14 mm rod threads, these tie rods rank among the industry's toughest.

Solid Steel Bar Tie Rods

The solid steel tie rods are made with 1" diameter bar and paired with the industry-leading chromoly tie rod ends. The heim joint ends use massive 3/4" threads to make them as beefy as possible, and the rebuildable inner ball and sockets have 16 mm rack threads to bolster durability. With all that strength, you can ride better and longer than ever.

Rod Type	Swaged Tie Rod	Solid Steel Tie Rod
Tie Rod Material	Steel tube	Solid steel bar
Inner Ball & Socket Thread Diameter	14 mm rod threads/16 mm rack threads	3/4" rod threads/16 mm rack threads
Outer Tie Rod End Thread Diameter	14mm	3/4"
X24 Tech Dual-Bushing Design
Greasable
Inner Boots
Steering Stop Kit
Misalignment Bushings, Tie Rod Studs, & Hardware

Features:

• Heavy-duty dual PTFE bushings:
  • Designed with X24 Tech
  • Prevents wear
  • Reduces slop
  • Improves overall durability
• Solid steel aluminum tie rods use:
  • 3/4" outer tie rod ends
  • Rebuildable inner tie rod ends that use 3/4" rod threads and 16 mm rack threads
• Swaged tube tie rods use:
  • 14 mm outer tie rod ends
  • Rebuildable inner tie rod ends that use 3/4" rod threads and 16 mm rack threads
• 65% larger housing than stock
• Over 50% less wear than OEM after 15,000 cycles
• Grease fitting for rack gears

Fitments:

• Honda Talon 1000R : 2019+
• Honda Talon 1000R-4 : 2023+

• Not compatible with SuperATV 8" lift kit
• Not compatible with models that have Live Valve Shocks