This product has been discontinued
Tirox SnapJack SS Single Swingarm Jack - 803521 Item # 617123
Description
Tirox are back with their latest product designed to make owning and maintaining your bike a whole lot easier!
Following on from the SnapJack V2 is the new SnapJack SS (Single Sided) rear stand. Designed for bikes with a single sided swingarm to make lifting the rear wheel off the floor for maintenance and effortless task.
Just insert the rubberised pin inside your wheel axle, lower your side stand to the ground and push at the pivot point to lift your back wheel easily. Once off the ground you can spin the wheel freely to clean or lube your chain and wheel without having to carry around a full paddock stand. Ideal for touring or long rides thanks to it's size and carry pouch which fits in most bike luggage.
Features:
- More stability and adjustability than previous versions
- Lifts tire approx. 1/2" to allow tire to spin freely
- Fits easily into most tank and saddle bags
- Adjustable to work with most single swingarm modern motorcycles
- Made from HSLA (high strength, low alloy) steel
- Durable powder coated finish
- Traction pad included for use on smooth surfaces
- Includes: SnapJack SS, brake locking strap, anti-skid pad, locking pin and carry pouch
- Easy to use: Lock the front brake with the included strap, with the bike on the stock kickstand, place the SnapJack SS into on the hub and push the SnapJack SS into position
Part Numbers for Tirox SnapJack SS Single Swingarm Jack - 803521
Reviews
Rated 5 out of
5
by
dean78 from
SS snapjack
I purchased this snapjack for my 2020 1290 super duke R. I read and followed the simple directions. Ensure bike is in gear, front wheel is turned fully to left and put on side stand. To ensure bike is kept stable put the provided Velcro strap around the front brake lever. Ensure snapjack is close to rear tire to ensure it has ability to lift rear wheel. I just pushed the snapjack towards the tire with open palm. This way less chance of pinching fingers. Didn’t take much pushing force for it to work, raising the tire about half inch above the ground allowing me to clean and oil chain and clean rear wheel. Tool comes with small rubber pad which needs to be put under the “foot” of jack so doesn’t slip. There is a pin that needs to be inserted once jack is up to ensure jack doesn’t release while working on bike. Caution to not pinch fingers/hand when releasing jack. This jack works as advertised. Will be great tool to take on trips allowing me to simplify oiling chain and basic rear wheel maintenance
Date published: 2020-06-22
Rated 5 out of
5
by
Ducatista from
Exceeded Expectations!
I recently purchase the Tirox SnapJack SS Single Swingarm Jack Item #: 803521, Tirox Chain Cleaner with Brush 400g Item #: 152971 and Tirox Synthetic Chain Wax Item #: 188448 from FortNine.
This was use on my 2017 Ducati Supersport S.
I am 100% satisfied with these products and would recommend there purchase whole heartedly.
The Tirox SnapJack SS Single Swingarm Jack is of very high quality and is easy to use. I was a little unsure of how it would work the first time but the bike “snapped” into place without a fuse and was completely stable.
The Tirox Chain Cleaner with Brush is also easy to use. I don’t understand any criticism directed towards these products. My chain was absolutely spotless with a few minutes effort. I rinsed with about a litre of warm water as a hose wasn’t handy and then wiped it down with an old microfiber cloth.
The Tirox Synthetic Chain Wax applies easily and doesn’t fly off. I applied the wax liberally and let it dry for at least an hour. The chain runs very quietly and there is no fling off on my rear rim… none!
This Tirox suite of products works perfectly. I rate them 10/10!
Date published: 2018-07-25
Rated 5 out of
5
by
Mike from
Didn't fit but Tirox made it right
Purchased this jack for my Ducati Monster 796. The pin that came with the jack was too big. Following the advice of the other reviews, I emailed Tirox. Basil (the owner) replied almost right away and mailed me a new correct sized pin. The pin took about 2 weeks to arrive, but that could just be due to the whole COVID-19 situation and shipping is slow. Basil tells me that they would be sending Fortnine an updated version of the jack in the future, which includes two different sized pins to fit your Ducati. I made my purchase in April 2020. I don't know if Fortnine is still stocked with the old single pin package or not, but be assured that Tirox's customer service will step in and make things right free of charge if the pin happens to not fit your particular bike.
As for the jack itself - it takes a little bit of practice. The first few times I tried to jack my bike up the rear wheel kept sliding away from the jack. You have to be at a very particular angle and distance from the wheel to get it to work properly. Other than that, it works just as advertised. The jack itself is solid and it got the job done when I needed to lube my chain.
Date published: 2020-05-07
Rated 5 out of
5
by
Newmonsterowner from
Works as Advertised
“ As a 60+ new rider everything is new to me including simple maintenance like cleaning and lubricating your chain. I purchased SnapjackSS for my Ducati monster 796. The 42 mm roller was just a little too big to fit in my size hub. I gave Basil, the owner of Tirox, call and he personally sent me a new roller that would fit. The whole buying experience was awesome and a big thank you to Basil for all the extra work he did. I completed my first chain service this morning and the product was easy to use and performed exactly as advertised. I would highly recommend to anyone”.
Date published: 2020-02-29
Rated 5 out of
5
by
DesmoSco from
Great Product
This is a great product. Well made and well thought-out. Easy to use. No good for wheel changes but perfect for chain maintenance at home or while travelling. Note for Ducati folks it's for the later large diameter hubs. Packages says it's also good for KTM. Highly recommend!
Date published: 2019-07-20
Rated 5 out of
5
by
Frustrated customer from
Great way to clean and lube chain on my Ducati
Very easy to use and what a massive tie saver when away from home and needing to clean and lube the chain. Works well. Recommend using the provided small rubber mats to keep the kickstand from sliding on concrete. When you push in the SnapJack just make sure you gran the wheel and pull towards your t the same time. Didn't require a ton of effort actually when done correctly. The brake strap keep your bike from lolling away and doubles to keep the kit together in the provided bag.
I bought the SnapJack SS for my Multistrada 1100S and Monster 1100. They both use a smaller diameter axle so I contacted tiros. Basil sent me the smaller diameter spool and I installed it about minute. Very pleased with the product and highly recommended. newer Ducatis and other single sided swingers biked may have the larger diameter axle to the regular spool is probably correct. If you need it smaller a few minutes on simple lathe would get it to fit your axle.
Overall very pleased with both the SnapJack and how helpful Basil from Tirox was.
Buying from Fortnine also super easy - free shipping and arrived earlier than expected.
Date published: 2019-06-19
Questions
Is this compatible with 2014 VFR800F?
If the bike has a single rear swing arm this jack will work.
Date published: 2019-11-26
Will this work on a 2006 Ducati STR 800 Monster?
If the bike has a single rear swing arm this jack will work.
Date published: 2023-11-14
Does it come with the 40mm pin now? (As mentioned in a few reviews)
No, according to the manufacturer, it comes with a 42mm and 27mm pin.
Date published: 2023-10-12
Can I use this on my Kawasaki 2016 Vulcan S 650?
Hi Maria,
No, not the model for single-sided swing arms.
Your Kawasaki has a two-sided swing arm.
Use this model instead:
https://fortnine.ca/en/tirox-snapjack-portable-jack
Check out the SnapJack web site for more information:
http://thesnapjack.com/
Good luck!
John
Date published: 2019-02-20
Will this work for 2019 Hyper 950?
Sure it will
Date published: 2019-08-05
Is it compatible with 2013 Honda CB1000R?
You will have to measure the inner diameter of the rear axle of you 2013 Honda CB1000R.
The SnapJack SS is intended for single sided swing arms with an internal diameter of 42mm of greater.
http://tiroxproducts.com/thesnapjack/snapjack-ss.html
Date published: 2023-03-16