Similar Products See other products of interest
UFO Universal Rear Fender Item # 203169
Description
Plastics by UFO
Part Numbers for UFO Universal Rear Fender
Reviews
Rated 4 out of
5
by
Jree from
Good (rare) narrow fender for decent price.
Could not find width spec on this fender, so thought I'd post it- the width at the front side mounting points is 6.5" (my picture distorts the measurement), and with a bit of squeezing, could prob fit between 6" inside width of your stays. The pics show the fender before finishing just after I had rough-cut the front edge and sides .. I removed the 3/4" flared edges cause I thought they looked a bit goofy. I tried this on both an old 1980 XR200 twinshock and a 1985 TLR200, both are good fits and 1/4 of the OEM price. Material can be cut without trouble with good tin snips, but remember 'you can always take MORE off, but not less!' The Acrebis NOST universal looks to me a bit nicer, but it seems to be wider also.. For 30$, this seems good.
Date published: 2022-01-11
Rated 5 out of
5
by
Jree from
Good value
good universal fender, fit my TLR250 with some trimming of the leading edge and of course those ugly side lips
Date published: 2024-07-12
Rated 5 out of
5
by
Joshf750 from
Looks great !
Bought it for my 86 tt350 ! Fits and looks great, has that motocross style I wanted. Just need to drill your holes to mount. Will buy again
Date published: 2022-02-13
Rated 1 out of
5
by
BikeBasher from
Did not fit
Usually great products but I bought this for a 2019 CRF230F and it did not come close to fitting. Looks like it fits the older XR200s no problem but not the newer style.
Date published: 2021-06-15
Rated 5 out of
5
by
Fily Bear from
Good Quality and Price!
Designed for full size bikes. Had to cut and reshape and trim to make this work on my little 82 xr100 but happy with the end result. Should be easy installation on the proper bike. Good quality, price and fast shipping from F9 as usual.
Date published: 2021-02-15
Rated 5 out of
5
by
Canam from
Good quality, price and fit!
The colour & finish are excellent. Fits well on the vintage bike I am installing it on.
Date published: 2017-11-23
Rated 5 out of
5
by
TTguy Yamaha from
good option
i got this for my 78 TT500 fit very well, the yellow was very close to my stock color and the plastic is flexible, but not flimsy very happy!
Date published: 2016-05-08
Questions
Would this fit on a 2004 Yamaha TTR 225?
No specific fitment information for this part. The fender measures approx. 24"L x 8"W x 5"H. You can set the fender through a broad range of angles, shorten or lengthen behind the seat line, and cut if necessary.
Date published: 2020-11-02
Will this rear fender fit a 2002 Honda xr80
This is a custom part with no specific fitment information. The rear fender measures approximately 24"L x 8"W x 5"H. You can set the fender through a broad range of angles, shorten or lengthen behind the seat line, and cut if really required.
Date published: 2020-11-02
Can the logo be removed from this?
It feels like it can (it’s definitely a sticker) - might take some scrubbing and goo gone as it seems to be applied well.
Date published: 2021-01-08
Would this fit 1979 suzuki pe175?
This is a universal rear fender, therefore we cannot confirm compatibility.
Date published: 2023-05-15
What are the dimensions of this fender? Length, width and height please..
This fender is a great alternative to many applications. If you are fitting this to a 70's Yamaha TT500, it looks amazing, especially paired up with the matching front fender. The rear fender measures 24"L x 8"W x 5"H. You can set the fender through a broad range of angles, shorten or lengthen behind the seat line, and cut to your requirements. Excellent injection finish and plastic oem spec.
Date published: 2024-03-28