Wheels MFG T47 Inboard ABEC-5 Bottom Bracket

A T47 threaded BB with inboard bearings for use in BB shells with widths ranging from 68-132 mm, or above 73 mm for the 30 mm option. Machined aluminum cups thread together directly into a T47 BB shell. Bearings are easily serviced or replaced. Includes sleeve to fit between cups for added protection from dirt and grime, and also keeps your internal wires and hoses from rubbing on the crank spindle.

T47 BB cups are similar to standard BSA threaded cups in that the drive side cup is left-hand thread and the non-drive side cup is right-hand thread. Use a quality grease when installing in steel or aluminum BB shells, and an anti-seize compound compatible with titanium BB shells.

Features:

• Drive Side Bearing: Enduro Angular Contact
• Color: Black
• Bottom Bracket/Frame Interface: T47
• Bottom Bracket Shell Width (mm): 68 mm - 132 mm
• Bottom Bracket Shell I.D.: 47 x 1.0 mm Threaded
• Tool Pattern: 48.5 mm x 16-notch

Included:

• BB Cups with bearings
• x2 Silicone dust seals
• x2 0.5 mm crank spindle spacers
• x2 1.0 mm crank spindle spacers
• x1 24.00 mm ID Wave Washer (for SRAM GXP BB)

Instructions for 22/24 mm SRAM

Instructions for 24 mm Shimano

Instructions for 30 mm