Wolf Tooth Remote Dropper Lever

Solve common dropper remote complaints with the compact, ergonomic and sturdy ReMote dropper lever. Beginning with a long list of rider and mechanic requests, the Wolf Tooth team set out to address each and every one. From its hassle-free installation, to smooth ball bearing action, to engineered failure point, the lightweight ReMote leads in every category.

Features:

• UpFront cable fixing: The dropper cable is attached at the lever, making setup and adjustment quick and easy. Simply secure cable at seatpost using stock barrel or cable clamp and route to bar for a significant reduction in installation time and frustration.
• Large-diameter ball-bearing pivot: An industry first, the ReMote uses a massive 21 mm sealed cartridge bearing for smooth operation and unparalleled modulation.
• Cable-kind clamp: A precision-machined cable path and custom clamping screw with captive washer won't damage cables like more common set screws. As an added bonus, cables can be cut to length and crimped prior to securing.
• Low-profile lever: The ReMote lever sits close to the bar, minimizing the distance the thumb must be removed from the grip while reducing the likelihood of knee contact in technical terrain and adds a bit of extra length to overcome stiff dropper internals.
• Integrated cable adjustment: The ReMote solidly-mounted barrel adjuster makes on-the-fly adjustments quick and easy while eliminating the rattles caused by common inline cable adjusters.
• Breakaway axle pivot: Crashes are bad, but expensive crashes are worse. That's why the ReMote features an engineered failure point, allowing the lever to break away from its base in the event of a crash. Replacement axles are inexpensive and readily available here.
• High-traction lever: A machined surface ensures that control is not lost, even in the worst of conditions.
• Broad compatibility: The ReMote has been tested and is recommended for use with many cable-actuated dropper posts. See the compatibility section below for details.
• Made in the USA: From lever to packaging, 65% or more of each ReMote is made in the USA.

Compatiblity:

• Compatible with all cable actuated dropper posts.
• Works with dropper posts that have the barrel end of the cable at the remote and those that have the barrel end at the post.
• If your post is not listed in the charts below, measure the pivot center to end of your current lever. If it is greater than 52 mm the Light Action will work best. If it is less than 52 mm, the Standard ReMote will work best.

Mounting Type:

ReMote 22.2 mm - includes hinged handlebar clamp for 22.2 mm handlebars. All mountain bike handlebars are 22.2 mm where your shift and brake levers attach even on 31.8 mm handlebars. (31.8 mm and 35 mm handlebars just refer to the diameter where the stem clamps). Attach with 1-2 Nm max.

Mounting Compatibility