Similar Products See other products of interest
Item #157055
Yoshimura Fender Eliminator Kit
$148.99 - $433.99
Yoshimura Fender Eliminator Kit Item # 157055
Description
This kit incorporates new Shrink Solder Connectors and improved weather tight light housing, and brighter DOT compliant LED light.
Features:
- Improved D.O.T. compliant L.E.D. light and housing
- Easy to use Heat Shrink Solder Sleeve Butt Connectors
- Model specific precision laser-cut stainless steel bracket tucks discreetly under the tail section of the motorcycle
- Black anodized aluminum license plate frame with silk screened Yoshimura logo included
- Stainless steel hardware included
- Yoshimura LED Turn Signal Kits available separately
- Accomodates 4" x 7" license plates
- Made in the USA
Part Numbers for Yoshimura Fender Eliminator Kit
Fitment for Parts Yoshimura Fender Eliminator Kit
This part fits the following vehicles:
Reviews
Rated 4 out of
5
by
nickypentangeli from
a little pricy but looks great.
CAUTION FOR QUEBEC PLATES: This kit is designed to fit smaller US sized plates, not Quebec plates. That means to use this kit w/a Quebec plate you'll need to enlarge the holes on your license plate a little with a drill and the housing that comes with the kit that goes over top of the plate cannot be installed.
I installed the fender eliminator on my Honda CBR650. Its a little pricey at over $200 but its extremely well made and the kit itself is very easy to install. Removing the original rear fender can be a little tricky but with someone helping you it'll take an hour and a half.
Date published: 2017-09-06
Rated 5 out of
5
by
jeff from
Great Kit For The Perfect Look
Looks phenomenal. All of the parts are high quality and well finished. Maybe a little on the expensive side but I love the Yoshi branded plate frame and can't deny the quality of what you get. Install took maybe 3-4 hours and was fairly straightforward. I used the TST Industries fender eliminator install Youtube video as a high quality guide to follow for removing body panels for my specific Yamaha MT07.
Date published: 2021-04-12
Rated 5 out of
5
by
Biff75 from
Looks Great
The Fender Eliminator Kit was easy to install and looks great but is far too expensive for what you get. Way over priced.
Date published: 2019-09-02
Rated 4 out of
5
by
Anonymous from
Looks Awesome
Looks awesome with the exception, the plate cover doesn't align with my plates.
Date published: 2014-01-14
Rated 5 out of
5
by
Aman G from
Easy to install and looks great!
I bought this for my 2018 R3 and it fits perfectly. Although the license plate frame is made for American sizes which is smaller than Canadian ones. You don’t need to use the Frame and I think it looks better without it. You will need a wire stripper and if it’s your first time doing wiring I recommend buying some extra crimp connectors, in case you mess up the first time. This kit comes with all the necessary hardware and some extra bolts which are a nice touch. Such as bolts to hold the licence plate to the holder. The LED light is nice and bright as well. Overall this is the nicest looking kit and the most legal kit.
Date published: 2019-08-30
Rated 5 out of
5
by
Alff from
Works as advertised kind of expensive, the stock one looks terrible and the first time I went off road I broke it off
Date published: 2019-08-28
Rated 5 out of
5
by
skankerveen from
Much cleaner look than stock
Just installed this two weeks ago. Looks excellent, really showcases the fat rear tire on the FZ-07. Makes the bike look ten times better, highly recommend this fender eliminator.
It's a bit expensive, I got it on a modest sale. Obviously name brand parts command name brand prices and I have no problem paying for what I consider to be a significant upgrade to the look of the bike. But if you're on a budget it's something to consider.
I would say although it's a bit of a pain, you can install it yourself as there are some excellent youtube guides that make it go from "swearing on a Saturday" to "a tricky Tuesday evening".
Date published: 2017-05-04
Rated 5 out of
5
by
Dave CB1000R from
Fits great!!
Easy to install, perfect fit, nice finish, 25mins max to install!!
Date published: 2015-11-03
Questions
Do your stock turn signals mount to this?
Yes, they come with turn signal brackets to mount your stock turn signals
Date published: 2019-10-15
Does fortnine sell the additional kits need to install on a 2008 cbr1000rr? Also does this kit include the turn signals?
Does this come with the led brake light or what one is recommended to pair with this? I ride a drz 400s
There is no Brake LED per say. However, it does have a white LED light to illuminate the plate for night time operation/visibility of your plate.
Date published: 2023-07-06
Why are there so many versions/prices for this kit and what’s the difference? I know that most of the versions are for differnt bikes, but some don’t even say what’s different about them.
They're just all bike specific, that's the only difference.
Date published: 2019-07-09
I live in BC and hate the ugly stock fender. Our plates are 5 by 8 and will not fit in this. Is there any other fender eliminator that will fit a 5 by 8 plate? If not, how can I cut my plate to fit? I need this, the stock fender is UUUUGLY.
Unfortunately my plate didn't fit either (ON) I had to trim slightly with tin snips. You can get them at pretty much any hardware store. It was very easy and now it fits perfect.
Date published: 2020-11-18