Motion Pro
Motion Pro Chain Breaker and Riveting Tool - 08-0058
Item: #141186 | Part Number: 08-0058$164.99
Description
Versatile enough to be used on cam chains or drive chains Will break chains from #35 to #530 For chain #520 and up, it is recommended to grind the rivet head Each kit includes 3 pin sizes to fit most chains (2mm, 3mm, 4mm) Investment-cast, hardened body and redesigned body...
Motion Pro Chain Breaker and Riveting Tool - 08-0058 Item # 141186
Description
- Versatile enough to be used on cam chains or drive chains
- Will break chains from #35 to #530
- For chain #520 and up, it is recommended to grind the rivet head
- Each kit includes 3 pin sizes to fit most chains (2mm, 3mm, 4mm)
- Investment-cast, hardened body and redesigned body bolt
- Recommended for light to medium-duty use
- For riveting hollow nose master links only
- Kit includes press plates
- For riveting solid nose master links such as those found on EK and Regina chains, use 08-0135 Jumbo Chain tool in conjunction with 08-0142 Quad-Stake Rivet Kit
Part Numbers for Motion Pro Chain Breaker and Riveting Tool - 08-0058
Videos
Videos
Reviews
Rated 4 out of
5
by
HighRise from
Did the Job
Tool performed fine. I can see where it might be a bit weaker, but as long as you have some mechanical sympathy, it will do the job.
Tool broke 3 links in total, and as long as the rivet heads are filed down, it does the job. If it "feels" like too much effort is needed, remove the tool and file the head down more. There is a lot of force on the breaking pin, so don't force it.
The hardest thing about pressing the plates was keeping everything lined up. Tighten the tool about 1/2 turn, then check width of link with a caliper.
Flaring the rivets was easy as well. Make sure everything is lined up, tighten down a little bit, and check flare with calipers. Most are between .20"-.25"
Date published: 2017-03-22
Rated 1 out of
5
by
Samuel from
Poor design
Only Use one time, the piece break haft !!!!!! a steal one is better.
Date published: 2019-06-27
Rated 4 out of
5
by
NROHK from
Worked Great!
Bought this about a month ago, worked great. Does not feel sturdy enough to break a typical motorbike chain loose without grinding a pin, takes a lot of force even then. I used a dremel tool to grind down a rivet before using the tool.
The tool is a bit expensive for what it is.
Date published: 2022-11-14
Rated 4 out of
5
by
America Rider from
I bought this a month ago, it worked well (only used once as yet) and will likely outlast the number of chains I'll need to change on my bike.
Date published: 2021-08-29
Rated 1 out of
5
by
zfazer from
This tool is a one use only... The backplate and the anvil does not last at all very poorly made. Ruined my master link twice on my second chain job before I figured out what was going on. The anvil is pressed in and will pop out. DO NOT BUY! Invest in the jumbo tool or another heavy duty one
Date published: 2020-03-01
Rated 4 out of
5
by
Pierre from
Fonctionne bien
j'ai remplacé 2 chaines avec , ça fait le travail. en contre partie je trouve que les levier / poignée des outils pourrait être plus long et plus costaud pour une utilisation plus facile
Date published: 2019-09-13
Rated 5 out of
5
by
Nick from
A Must Have for All Motorcycle Owners
Not only is this a must have for any motorcycle owner with a chain drive motorcycle (rivet links are ALWAYS safer than clip type), but also great for any DIYer fixing up old engines since it can be used on small engine cam chains as well. Worth every penny, high quality, used all the time
Date published: 2019-03-20
Rated 5 out of
5
by
Alex from
Great tools
Perfect fit, strong, its my first change of chain on my v-strom, i had to remove rivet 4 time, i took my time, nothing is broken, my chain is perfect installation. Yeah i recommand. Even after 4 time, tread is perfect, enjoy how easy to use it was.
Date published: 2025-09-25