Peaty's Holeshot Biofibre Cycling Tubeless Sealant

Developed alongside World Cup mechanics and world champion racers. Peaty's Holeshot Tubeless Sealant is packed full of biodegradable fibres & sealing particles to give a fast and strong seal. Using the latest fast-acting latex, this water-based sealant is ammonia-free, non-hazardous and lasts up to 6 months in the tire in temperate climates. It won't ball up in the tire and is easily washed out. The biodegradable fibres and particles bind together with the fast-acting latex to create a clot (like platelets in your blood) to quickly & effectively seal holes and tears up to 6 mm.

The biodegradable fibres and particles bind together with the fast-acting latex to create a clot (like platelets in your blood) to quickly & effectively seal holes and tears up to 6 mm.

Biofibres - For a faster, stronger seal:

The biggest change with the Holeshot sealant is the addition of biofibres. Fibres tangle up with particles and latex to create a faster, more durable seal. To get a good seal you need fibres of a really specific size, so after years of testing and development Peaty finally found a fibre which gives incredible sealing performance, while remaining super durable.

The sealant is also slightly thinner, for easier initial setup, and added higher concentrations of sealing compounds - to work with the fibres and platelets and give a better/more durable seal.

Application:

Always ensure you have tubeless ready rims and tires. For best results use with Peaty's Tubeless Rim Tape and Peaty's Tubeless Valves.

• Shake the bottle vigorously before every use to ensure an even distribution of fibres and particles.
• Rinse away any old sealant from the tire and dry off completely. For brand new tires degrease, rinse and dry the internal carcass to remove factory mold release agents and other contaminants.
• Seat your tire onto the rim and inflate initially with no sealant, using a track pump, inflator or compressor to pop the tire bead fully onto the rim.
• Deflate the tire and, with the valve at the three o'clock position, use the flexible injector pipe provided to inject the desired amount of sealant directly through the de-cored valve.
• Re-insert the valve core and re-inflate the tire to desired pressure.
• Distribute the sealant around inside the tire by spinning the wheel and tapping the tire on the floor.
• Listen for any air leaks and orientate the wheel so that the sealant flows around the inside of the tire to the area required. Continue doing this until you can't hear any more air loss.
• Wash away any excess sealant that may have found its way to the outside of the tire or rim with water.
• Check tire pressures and ride!

Recommended Quantities:

• Road 30 - 45 mL
• CycloCross 60 - 75 mL
• 26" MTB 60 - 80 mL
• 27.5" MTB 70 - 90 mL
• 29" MTB 100 - 120 mL