TecMate OptiMate Charge Monitor for 12V Batteries Auto/DIN Socket - O-126V2

SAE to DIN/AUTO 12V socket adapter with state of charge monitor that plugs directly into your motorcycle, ATV/SxS, car, pick-up truck or boat's 12V power port – Adapter with 24-7 battery status at a blink of an LED!

Smart battery lead that measures voltage; monitors charge of a stored 12V lead-acid & 12.8V lithium-ion battery and confirm if the vehicle charging system is working correctly. Fits any Ø21 mm AUTO and Ø12 mm DIN socket.

Features:

• SAE connection system fits any SAE standard 2 pin connector, includes in-line seal that mates with OptiMate SAE - premium quality
• Ideal for 12V lead-acid and 12.8V lithium LFP (LiFePO4) batteries
• Battery status indication every 3 seconds (LED blinks)
• Battery status indication for high performance AGM
• Battery status indication for lithium-ion LFP
• Fits both auto and bike sockets
• With weatherproof sealing cap

Specifications:

• Length: 10"/25 cm
• Battery Connector: Ø21 mm AUTO and Ø12 mm DIN plug
• Charge Connector: 2-pin SAE, protected from dirt and liquid with rubber sealing cap and shroud
• Operation: 2 automatic Modes – Battery charge level monitor (single LED blink mode) & Charging system test (arrow mode)
• Vehicle storage: 4 LEDs cover 'full to empty' voltage range of all 12V batteries, including higher voltage AGM for power sport (3th √ LED ≥ 12.7V). LED matching charge level blinks every 3 seconds (long term draw less than 0.2mA)
• Vehicle running: LED arrow mode activates when charge voltage reaches ideal charging voltage; up to minimum 13.5V or ideal range 14V+
• Cable Rating: 18AWG (0.82 mm2) SPT-2W
• FUse: 10 Amp (inside the connector)
• Use: -40°C/-40°F very low temperature, remains flexible at 'below freezing' temperatures
• Style: Fully enclosed electronic circuitry with 4 LEDs, SAE charge connector with rubber sealing cap & shroud