KFI Products Honda Rancher 420 Multi-Mount Winch Mount - ATV-710

All Honda Rancher 420's that have a stock rear 1-1/4" rear receiver hitch.
If your Rancher 420 doesn't have the rear 1-1/4" receiver hitch you may use this as a removable front winch or possibly purchase the rear 1-1/4" receiver hitch.
This kit will allow you to mount your winch on the front or the rear of your Honda Rancher 420 using the stock rear 1-1/4" receiver and the supplied front 1-1/4" receiver.

Specifications:

• Constructed of 3/16" steel
• KFI Products are metal bead blasted before they are powder coated for the best possible finish prep
• Powder coated black for supreme durability
• Complete installation instructions included
• All mounting hardware included
• Roller fairlead and winch not included
• Made in USA

Designed to work with the following Winches on the 1-1/4" Receiver Mount:

• KFI: S2000 / A2500 / A3000 / U4000 / U4500
• WARN : U2500 / A2000 / A2500 / 1.5ci / 2.5ci / 2.5ce / 2.5s / 3.0ci / 3.0ce / 3.0s
• WARN : RT15 / RT25 / RT30 / XT15 / XT25 / XT30
• RAMSEY : ATV2500 / ATV3000
• SUPERWINCH : All ATV Winches
• MANY OTHERS SIMILAR TO THE ABOVE
  - Standard ATV Winch 4-hole bolt pattern of 3.00" X 4.875"
  - Standard ATV Winch 2-hole bolt pattern of 3.100"

Note: With some winches the motor may be on the opposite side. This will require the rotation of the winch and the cable will need to be pulled all of the way out and then re-spooled in the opposite direction. Just make sure that your cable comes out between spool and the mounting plate when completed. This will also require you to reverse the wiring on the winch. With some winches you may need to remove or reverse the backing plate